I still need a main board for Roland Versacamm SP-300

[CENTERVILLE SIGNS]

ANYONE ? ? ?

 

[ringocat22]

Looks like there's a few on Ebay, have you checked there?

 

[CustomThunder6]

I'll check and answer in hour,
But ship only EU
Price for new would be about 500 euro with shipping included (need to check invoice price from roland) as I'm trying to sell all old unsold parts for price we paid to Roland and will create special lot in ebay to get 14 day money back guarantee after receiving

 

[CustomThunder6]

Checked,
Sorry this one is sold already,
left xc540 but it's incompatible according roland info

 

[CustomThunder6]

Found some chips for SP
Code 15159127
Written EPSON IC E09A19RA
But not sure for what they are

 

[CustomThunder6]

And these carriage boards

 

[CustomThunder6]

And these

 

[damonCA21]

I still have one in stock that you messaged me about. If you are looking for a cheap one if you post your budget then someone may be able to help

 

[netsol]

most of the circuit board companies i used have "aged out"
i need to replace or repair a servo board for a vp300i

i am going to give this ebay reseller a try.

https://www.ebay.com/itm/264649433324?_skw=roland+vp300+system+board+repair&itmmeta=01KZ8XKFHNR6MNM6CFS37PRKYV&hash=item3d9e55e0ec:g:kBgAAOSwTeReWAh-&itmprp=enc%3AAQALAAAA4GfYFPkwiKCW4ZNSs2u11xB2AOjOtPmAVvIG2XDfDgVuhLsqQ9Gk84s4QORQ0CXP5yMWOKEcYdXsU55cgU8%2FWShWU5Fh2XHG3geVp5JHIn9AnTyUCGmzFb%2FKqcaJOTiZCKvJ%2FTdHH%2BgGxegmt3y2db9QsVk2ufUdWMaV1cwTVdYs0h0fui9v5ykR88J2ypBHsfD4QHaYDf7dRw2ILftGRYDFkvK63AjfNMmyG6%2BYA%2B5unMNBM9%2FmgaZBULmnef9xz8m8Pjyr5JGqyFm0duyswqki27F%2F6IRE5IBIwslJaEOw%7Ctkp%3ABk9SR_74zZ36Zw

i messaged back & forth with them & they seem reputable. I BELIEVE several other signs101 members have had success with them as well

since we closed the warehouse in englishtown i find it difficult to even attempt on of my own circuit board repairs

 

[damonCA21]

If you dont have any luck with them I have a working servo board for the vpi in stock. Just got the printer in a couple of days ago and is all working fine apart from needing new heads

 

[netsol]

we just closed my warehouse and relocated 2 printers and my stratasys 3d printer to my 3 car garage.
no room for another 54" printer but I THOUGHT a 30 would be much smaller (not so much)
so i picked up a bargain from facebook marketplace and am refurbing it.
it is convenient to have a print & cut setup

 

[CustomThunder6]

Servo board for vp300 new from roland goes little about 600 eur