IJ35C Profile for SP300i?

[john1]

Hey guys, I received my sample rolls of IJ35C media and the 8509 lam today.

I looked on the 3M site and can't find a profile for the machine. I have a sp300i Versacamm.

The print profile i use for concept 203 and 3651 is the general vinyl profile and i am getting very grainy prints on the IJ35C vinyl. I have adjusted the heat and all and nothing is really helping.

Thanks!

 

[john1]

Anyone?

 

[Custom_Grafx]

http://www.rolanddg.com/download.html

Hi John - go to above link - and try the ij40 profile for your machine as a starting point.

If you find it's laying down too much ink - tweak the individual and total ink limits via the media profiles section of versaworks.

 

[MikePro]

IJ180C-10 and IJ180Cv3 profiles have worked just fine for me on the IJ35 media through my mimaki jv3. safe to say they should work just fine for you as well.

 

[john1]

Thanks guys, For some reason i never thought to go to the Roland site, I went to the 3M. The 2 profiles seem to print alot better, Thank you!