installing sp300 drivers

[shaunie44]

trying to install drivers for roland sp300 using windows 7 64 bit , printer working etc but comes up other device tried installing drivers from roland site but get a error message module in use any ideas please

 

[Joe House]

I think the last OS they made SP300 drivers for was XP. And probably 32 bit. I don't know if you'll be able to use some compatibility mode or not. You may need to get an older computer to print to that printer.

Good Luck

 

[Bert Wondervan]

trying to install drivers for roland sp300 using windows 7 64 bit , printer working etc but comes up other device tried installing drivers from roland site but get a error message module in use any ideas please

Which rip software do you use?

 

[jimdtg]

Which rip software do you use?

Why did you ask RIP software? shaunie44 asked about Roland driver

 

[Bert Wondervan]

The rip software must support the driver of your printer.

 

[jimdtg]

The rip software must support the driver of your printer.

That's built-in RIP printer driver, not relative printer driver for Windows.

 

[Jim Hill]

That's built-in RIP printer driver, not relative printer driver for Windows.

What you should do is convert your SP-300 to an SP-300V and then you can use windows 10 if you would like and you also can use VersaWorks software which has the drivers you need included with it.

Another plus is it makes your SP-300V worth more money when you go to sell it someday.

My SP-300 used to run on windows XP with ColorRip software but I do not believe there are any driver updates for ColorRip past XP

If you do a search on the site for how to convert an SP-300 to an SP-300V there are a number of tutorials and that is exactly what I used to convert mine.
You will need to get a copy of VersaWorks which I found online and it does take a few hours but it's well worth your time.

Jim

 

[Inkedallegiance]

ive done the mod and cant get versaworks to accept the sp300v it wont let me delete the aj-1000 printer to ad the versacamm any tricks to it?

 

[netsol]

I think the last OS they made SP300 drivers for was XP. And probably 32 bit. I don't know if you'll be able to use some compatibility mode or not. You may need to get an older computer to print to that printer.

OR install older OS dual boot, OR install on the new pc AS A VM

compatibility mode would be easier IF IT WORKS