I've been working on bring a JV3 back from the dead and have run into an interesting problem with my cyan head. I've attached a photo - it's the test draw marked "head 1". After giving up on that head and putting in a new one, I have the same area missing - test draw marked "head 2". At this point I am thinking it's the head cables so I swap both of the cyan cables for brand new ones....test draw looks exactly the same. Does anyone have any suggestions for the next step in diagnosing this problem?
Thanks.
![IMG_1528.jpg IMG_1528.jpg](https://www.signs101.com/data/attachments/79/79310-8c78203eeb6a088e8db550674d33e6cc.jpg)
Thanks.
![IMG_1528.jpg IMG_1528.jpg](https://www.signs101.com/data/attachments/79/79310-8c78203eeb6a088e8db550674d33e6cc.jpg)
Last edited by a moderator: