Large standoff caps

[Jr Douglas Imaging]

So I'm trying to find 1 1/4" dia x 1/2" h aluminum standoff caps that have a 1/4-20 thread pattern

client has a trade show booth that has these hard fastened to where the acrylic panels go

Ive looked -gyford-MBS-and numorus other but can't find the 1/4-20 thread

need 300+

Thanks
Wayne

 

[MikePro]

in a pinch, i'd just order the ones with the 5/16" thread on mbs and drill it out with a with a 7/32" or 15/64" bit (ican'trememberwhichoffhand) and hand-tap it with a 1/4" bottom-tap.

you shouldn't need a press, but it would be ideal to use if you had one.

 

[Jr Douglas Imaging]

in a pinch, i'd just order the ones with the 5/16" thread on mbs and drill it out with a with a 7/32" or 15/64" bit (ican'trememberwhichoffhand) and hand-tap it with a 1/4" bottom-tap.

you shouldn't need a press, but it would be ideal to use if you had one.

yea thats what its looking like but would like to avoid that