• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Leveling the bed of our Zund G3 Cutter

Raj2020

New Member
We had a tech in recently to help us re-level the bed of our Zund G3 Cutter. We decided to shoot and share this video in case it helps anyone!



If you need zund CNC contour cutting of any popular sign material like PVC, Corrugated Plastic, Foamboard, ACM or Styrene visit FireSprint.com!
Hi there. We have an older Zund M1600 that we desperately need to level. Was thinking this video would help, but, the video is private and cannot be viewed. Any chance you could make the video or share it privately? Many thanks
 

Greg Kelm

www.cheetaprint.com
Hi there. We have an older Zund M1600 that we desperately need to level. Was thinking this video would help, but, the video is private and cannot be viewed. Any chance you could make the video or share it privately? Many thanks

You need to have a technician come and do the work. They have a tool to measure each vacuum plate across the table.
 

JuRoc

New Member
i've seen and helped the tech level the bed, but i have not seen what are the bolt/screws that he tightens/loosens to fix the plates.
anyway ya'll can share the video with me, also if i buy the magnetic dial indicator, would that be good enough or do i need to buy the bracket that goes into a slot?
 

FireSprint.com

Trade Only Screen & Digital Sign Printing
i've seen and helped the tech level the bed, but i have not seen what are the bolt/screws that he tightens/loosens to fix the plates.
anyway ya'll can share the video with me, also if i buy the magnetic dial indicator, would that be good enough or do i need to buy the bracket that goes into a slot?
Send me your email address.
 

Notarealsignguy

Arial - it's almost helvetica
i've seen and helped the tech level the bed, but i have not seen what are the bolt/screws that he tightens/loosens to fix the plates.
anyway ya'll can share the video with me, also if i buy the magnetic dial indicator, would that be good enough or do i need to buy the bracket that goes into a slot?
All you need is a cheap dial indicator and a way to attach it to the gantry. Find a 0 point and adjust from there ,I assume the Zund has leveling screws under the vac plates? It's no different than leveling any table, land, concrete forms etc, no need to call a tech or be scared of it.
 
Top