• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Mimaki CJV30-130 Media Comp not printing

Inkslingers

New Member
Hey everyone, we're having a little trouble here.
When we go to print our media comp out we don't get the solid grey bars,
we just get 6 well spaced lines (single fine lines).

We've gone through hell's end cleaning the heads, doing custody washes and even changing the inks out.
Test prints come out as expected (aside from all the banding) so we don't see what's going on.

Please help!!

Thanks in advance,

:rock-n-roll:-Inkslingers Adelaide, South Australia
 

97GTB

New Member
If the Test Draw is printing fine then it sounds like it would either be some sort of electrical or internal memory issue. I'd give your local Tech a ring see if they have any ideas.
 

Inkslingers

New Member
Thanks for the fast reply.

The memory issue sounds like it but we can't be sure seeing as this is the first time anything like this has happened.

Here's a photo of what's going on.

DSC_0046.JPG

Cheers
 

artbot

New Member
how does it look when you just print? definitely looks like a data issue. but that could be caused by all kinds of stuff.
 
Top