• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

mutoh falcon plus

Derf

New Member
What model?

New or Used

1) Mutoh Falcon Jr 38" 4 color (RJ8000)
2) Mutoh Falcon Outdoor 46" & 60" (RJ6100 & RJ6000) Rockhopper
3) Mutoh Flacon II outdoor
 

Jackpine

New Member
It looks like a 48" Falcon Plus. A good printer is everything works. There is a Mutoh Falcon Jr 36" printer just listed on this forum for $8,000 + Flexi + other supplies and Aurora fill collection and it's only 3 months old.
 

Derf

New Member
Eco Solvent Ultra! you may need to convert ink from Plus to Ultra...

Looks like an RJ6100 however the stand is a bit different than mine.

You must assume everything is wrong with it.

It looks dusty and "non op" so you will need new heads, Ink lines, Dampers, Capping station, Pump for sure. and the ability to change all of these parts. Who knows you may need a mother board??

I'd say about $500
 

Mardi

New Member
Thanks for the input. I was not going to go more than 400. That was the amount I was willing to risk. And yes I disd assume that many things are wrong with it. As far as fixing it, I could probably tear any printer to pieces and put them back together....been there, done that.

Once again,
Thank you for the input guys
 
Top