need suggestions on a supplier

[martingraphics]

I have an customer who wants me to produce 2ea of 4 signs printed on 2 sides that will hang from their ceiling. They will have to have the hardware to attached to the drop ceiling. the signs will be 48"X24". I would like suggestions on what substrate would be best and what supplier can do this for me.

 

[ChicagoGraphics]

Gator foam or PVC with a couple of clips for droped ceilings

 

[petepaz]

Gator foam or PVC with a couple of clips for droped ceilings

+1
and do you need a supplier for the material or you need them to do the entire job?

 

[martingraphics]

which one would be less likely to bow or warp?
I need somebody to do the entire job.

 

[Letterbox Mike]

which one would be less likely to bow or warp?
I need somebody to do the entire job.

I'd use Ultraboard for this all day long, won't warp and is lightweight. PM me if you're interested and ill get you a quote.

 

[Billct2]

We do a lot of this type of work and use both gatorfoam (mostly 1/2 & 3/4") and Pvc, at least 1/4".

 

[TXFB.INS]

foamboard without a doubt

 

[anotherdog]

Gator would look slightly nicer, Ultra would be more durable in humidity (bow and warp). 1/2" should be fine.
Could also stick it on flat coroplast for economy and lightness.