Printing issue! HELP!

[401Graphics]

Printer is making a haze only to the left and right of printed areas, and only where the rollers touch. I cleaned all the rollers, the print head. and there's no static issues. Made heat adjustments, no difference.

 

[401Graphics]

Mutoh 1204 running flexi sign pro 10.5
3rd party inks. Media Arlon 4500LX Gloss

 

[401Graphics]

ok well i put the head from 'high' back to 'low' and it printed perfect. i guess thats the issue. even though ive always printed with the head up since i got this printer, and never had a problem printing.

 

[TDFcustomSL]

mine would do that with the head on high since the day I got my printer..

 

[401Graphics]

mine would do that with the head on high since the day I got my printer..

Interesting
Have you gotten your HP setup yet?

 

[TDFcustomSL]

Interesting
Have you gotten your HP setup yet?

Of course not, trying to find someone to do drywall is like trying to find a hooker during the day....damn near impossible around here! I'm half tempted to just attempt it myself.

 

[401Graphics]

Of course not, trying to find someone to do drywall is like trying to find a hooker during the day....damn near impossible around here! I'm half tempted to just attempt it myself.

Goforit, its easy

 

[BSL Graphix]

I've got the same overspray problem going on right now...and my print head is in the low position. I had this happen once before while I was using 3mIJ35 vinyl...and I switched to Ora3651RA and it started printing perfectly so I stayed with it. But I just had a new maintenance station and dampers put in my printer and now the problem is back. ugghh!!

 

[ams]

It's suppose to remain down when printing on thinner materials such as normal vinyl and for thicker materials like 18oz banner material, it needs to be up.