Q: sample/results from: Feed Calibration test - Roland SC-545

[96XP]

Left side is from my test. Right is a sample of how it should appear.
Prints still look very good coming through, no banding, though would like to correct this.

Where is the fault -and- how to adjust?

Thanks in advance.

 

[Roland Certified Tech]

Left side is from my test. Right is a sample of how it should appear.
Prints still look very good coming through, no banding, though would like to correct this.

Where is the fault -and- how to adjust?

Thanks in advance.

Please post picture of the nozzle test print

 

[Jim Hancock]

Do the nozzle test print in service mode... More informative... Your feed calibration looks fine. The pattern suggests other issues...

 

[96XP]

Once I have it, I'll come back and post.
Thank you for the help