• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Rapid Remover Adhesive Remover FUMES

Norman Clifton

New Member
Over the weekend I had a patient transfer truck that was covered in reflective vinyl. Spent 2 days removing decals and worse the remaining adhesive residual; I used Rapid Remover Adhesive Remover to do this and soaked the adhesive and scraped it off.
  • What a job ☹ - anyway completed – the issue is I tackled the adhesive removal on Sunday since no one was around and worked with the overhead door wide open. However this morning the fumes lingered and we had to open all doors to clear out the building -0 including the one unit beside us,
Would appreciate any suggestions for the next round - ?
I used wallpaper steamer and heat gun to remove decals but the adhesive was the worse part of the job.
 

Gino

Premium Subscriber
If you use decent ventilation, either or should not have an odor remaining too long. Never had a problem, but I never mixed the two.

Make sure the adhesive remover was for interior use.

I always put the rapid remover on and let it soak for maybe a minute, then use a plastic razor blade to scrap it off. Once it's basically off, I use another coat of remover and use wet (water) paper towels to do a final rinse and cleaning.
 
  • Agree
Reactions: 1 user

Solventinkjet

DIY Printer Fixing Guide
Put a fan at ground level blowing out the garage door. The VOCs in rapid remover are heavier than air and will sink to the floor. If you blow it out, it won't accumulate and fill the space. The fumes aren't toxic but they can cause irritation and just smell nasty.
 
  • Agree
Reactions: 3 users

citysignshop

New Member
I find there's waaaaaaay less fumes if you get rid of the big SPRAY bottle, and just dispense onto your rag/cloth etc, and wipe that onto the surface! This almost eliminates the 'overspray' which gets on the paint Beside the area intended....if you don't see it and clean up quickly, it often etches the surface and becomes a new hell to cleanup! If you really must spray, Zep makes a gel type spray can, BIG orange I think it's called, just an industrial degreaser, and it works as well, or Better than Rapid Remover.
011401_20-_20big_20orange-front.jpg
 
Top