Reading the Printed Barcode on Reflective

[Roto]

We have printed a whole lot of decals on 3M Reflective Wrap.

When we try to cut it on the HP 64in Cutter it can't read the barcode
and gives the message Barcode not found.

Does anybody have a solution for this?

TIA

 

[balstestrat]

There's bunch of threads about it. You can try to calibrate the material, scotchs tape or yellow filter on the OPOS.

Bottom line tho, don't use the barcode. Send the file and only, only use the square marks. You might keep your sanity.

Need Help - Summa S2T160 not reckognizing regmarks on reflective material

So the problem goes as the title says. If I print on vinyl it finds a opos marks and cuts but when using reflective material like avery 1500B, T2500, T6500 or similar the cutter won't find the regmarks. It doesn't matter if the material is laminated or not. The guys who sold us the cutter and...

www.signs101.com

Summa S2 cutting reading marks on chrome

I have been using the substance holographic vinyl for awhile and not had to do any adjustments with our cutter to read the registration marks and I can even do reflective and clear with no problems. I have a roll of the substance chrome vinyl I have been trying to get it to read the marks for a...

www.signs101.com

Oh man and why was your old thread not enough????

Print and Class 2 Reflective Material

We are printing onto Class 2 reflective vinyl. The problem is when we try to cut it the plotter won't read the barcode. We have tried covering the barcode with matte laminate and covering the plotter to reduce any direct light reflecting off the stock. Sadly neither of these options work. Does...

www.signs101.com