• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Discussion Roland XR-640

LaurisGr

New Member
Hi All,

Can anyone advise me how can I pull history report from Roland XR-640? I am newbie in print & cut, previously I have been working with vinyl cutters only, but looking to get into printing as well, so I'm checking used XR-640 in few days time and would like to get understanding of print heads condition by checking shot count. Owner of XR-640 does not have history report and I could not find any information in XR-640 manual on how to get that report...

And what do you think about attached test print?

Any help would be appreciated, thanks for you response in advance,
Lauris
 

Attachments

  • testprint.jpg
    testprint.jpg
    127.8 KB · Views: 1,494

Broome Signs

New Member
test print is fine

to get the report you need to
get into service menu

From memory

Number the 4 arrow s as follows

4

3 2

1

Turn the printer off



Then press buttons in this order 1 2 3 4

Then pres and hold down in order 2 1 3 and hit the power button
 
Top