• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Need Help Sg-300

Bianca

New Member
can anyone help..
I have A Roland sg-300
But the nozzle print from blue is not Oke?!

Manual cleaning, all kind of cleaning incl the powerfull..
Changed the wimpers...

I don’t know what to do anymore.

Any suggestions?
 

Attachments

  • 5637B1F9-F819-4A40-89ED-AB68042638E2.jpeg
    5637B1F9-F819-4A40-89ED-AB68042638E2.jpeg
    1.5 MB · Views: 152
Try an overnight head soaking (not sure how this is done on Roland 'officially', but you can always detach the cover under the capping station and close the drain tube with a clipper, fill up the capping station with cleaning liquid, unplug the machine from the mains and push the head back to its place to 'sit' in the liquid). If you had a head strike you may need new printheads.
 

Bianca

New Member
The test print is fine (black is the flash light).
 

Attachments

  • 91FA87B3-9FCE-4023-B4ED-57F42BCFEA9E.jpeg
    91FA87B3-9FCE-4023-B4ED-57F42BCFEA9E.jpeg
    1.9 MB · Views: 129
Top