Just In Sheet Yield Nesting/Imposition Calculator

[FireSprint.com]

Hi Guys,

Set this up today for you to use freely. It's a sheet yield nesting/imposition calculator for rectangles (or squares). It will tell you have many of a smaller sized rectangle will fit in a larger one.

Not that hard to run through the possible scenarios with a notepad and a calculator, but this will save you some time.

Create a shortcut link on your phone's desktop for quick access!



https://www.firesprint.com/sheet-yield-calculator.html

 

[myront]

I prefer width and height. a 4 x 8 sheet of coro would be 4'h x 8'w (landscape) or 4'w x 8'h (portrait) Have to make it dummy proof. is 3/4/200 March 4, 200 or April 3, 2000? That's why the military writes it as "3 Mar 2000" no confusion, no margin for error

Just me I guess

 

[FireSprint.com]

I prefer width and height. a 4 x 8 sheet of coro would be 4'h x 8'w (landscape) or 4'w x 8'h (portrait) Have to make it dummy proof. is 3/4/200 March 4, 200 or April 3, 2000? That's why the military writes it as "3 Mar 2000" no confusion, no margin for error

Just me I guess

You're just referring to the labels? So you would make it Width & Height instead of Width & Length?

 

[myront]

yes the labels

 

[GB2]

The standard should be Width (horizontal left to right) x Height (vertical top to bottom). The horizontal measurement should come first followed by the vertical measurement.

 

[FireSprint.com]

So when buying plastics, the second number indicates the length of the grain from the manufacturer.

Also, what do you call the dimensions of a roll? Generally we say length. Working on a roll length calc as well, so this can borrow the formulas.

All that being said, y'all are right. I have made the correction. Thanks for the input. Hope you find this tool handy. What other calculators do you think could be useful?

 

[Christian @ Visual Graphx]

Cool tool, I have a spreadsheet in excel that I built out math equations for nesting various sizes.

 

[FireSprint.com]

What other calcs could be helpful? Would love to build more!

A few ideas I have:
- Roll Length Calc (based on quantity of a print)
- Shop hourly rate calculator
- Sign equipment loan calculator with ROI
- Pantone to CMYK/HEX/RGB conversion

 

[ikarasu]

Cmyk to pantone would be handy. Illustrator is a bit finicky with that.


For the above...adding custom spacing would be nice. IE. .25" spacing for a router bit, or 1/16 for a saw blade, etc.

 

[jasonx]

Retirement calculator

 

[graphicsottawa]

I'm on the Width and Height bandwagon as well. Whenever I'm setting up a spreadsheet I do it in that order because that's the way it's set up in Illustrator. Less translation of terminology ==> Less stupid human involvment ==> Less chance for error.

 

[FireSprint.com]

I'm on the Width and Height bandwagon as well. Whenever I'm setting up a spreadsheet I do it in that order because that's the way it's set up in Illustrator. Less translation of terminology ==> Less stupid human involvment ==> Less chance for error.

This is done, go check it out!

 

[GAC05]

Retirement calculator

=IF(C19 lockdown end >= 11.2020,"Retire","Keep Working")

 

[MGB_LE]

Thanks for gifting this to the community FireSprint.com

 

[Kemik]

You could add a label gap to this calc, for space between die cut labels, 3" x 3" square plus a 1/8" gap before the next 3" x 3" square, or Eyemark/Crop gaps as Mimaki can have crops around every individual label or a group of labels.

 

[StephenOrange]

Oh no, this is all in weird American playtime-for-kids inches and feet. Maybe make one for the grown-ups around the world that use Metric ?
Yes, I’m only kidding about your ridiculous measuring ways.

 

[FireSprint.com]

Oh no, this is all in weird American playtime-for-kids inches and feet. Maybe make one for the grown-ups around the world that use Metric ?
Yes, I’m only kidding about your ridiculous measuring ways.

Haha. Yeah, it would be kind of nice if we used the global standard.

However, the calc is in metric (or whatever units you want it to be in)!

 

[StephenOrange]

Haha. Yeah, it would be kind of nice if we used the global standard.

However, the calc is in metric (or whatever units you want it to be in)!

I’m an idiot for not even noticing!! That’s why you can make these calculators and too many of us can only use them.
Thanks for sharing!

 

[The SignChef]

Cool tool, I have a spreadsheet in excel that I built out math equations for nesting various sizes.

Sounds like a GREAT time saver Christian!

Would you be willing to make available for purchase?

 

[Christian @ Visual Graphx]

Sounds like a GREAT time saver Christian!

Would you be willing to make available for purchase?

Not for purchase, but I'll spend some time scrubbing it of my internal stuff and share what I have.