Table top source?

[bornhurt]

Anyone have a source for these sheets of (i believe) acrylic table toppers? Ours have worn out their usefulness and its time to swap them out

 

[Humble PM]

I'd go for HDPE over acrylic - normal plastic suppliers should carry stock

 

[Grizzly]

That's most likely a self healing cutting mat. Which is more the softness of LDPE, but closes back together better than the LDPE. Grimco sells them but you have to call. These are the sizes they have available.

 

[Skooter]

We've always bought ours from SpeedPress.

Rhino Cutting Mat SpeedPress Sign Supply

The Best Deals on Sign Supplies. The super size, self-healing mat is perfect for your production tables. Now you can cut razor straight on this thick, seamless mat.<br> Make a cut, then another cut a hair away, mat doesn’t gouge so every cut is flawlessly straight. Sizes from 2’ to 4’ up to 6’ x...

www.speedpress.com

 

[Draco-Scorpius]

We've always bought ours from SpeedPress.

Rhino Cutting Mat SpeedPress Sign Supply

The Best Deals on Sign Supplies. The super size, self-healing mat is perfect for your production tables. Now you can cut razor straight on this thick, seamless mat.<br> Make a cut, then another cut a hair away, mat doesn’t gouge so every cut is flawlessly straight. Sizes from 2’ to 4’ up to 6’ x...

www.speedpress.com

 

[Draco-Scorpius]

I also recommend SpeedPress, especially because they offer to trim to a custom size.

 

[DL Signs]

Lots of brands and places that sell them, Rhino is the most common, but they're all just a sheet of urethane.
I get ours through USCutter, reasonable cost , lot of sizes, if they don't have an exact size, just get one a bit bigger and trim it down.

Image One Impact Table Top Extreme Cutting Mat - 24" to 144" Sizes Available

Tabletop Cutting Mat, assorted sizes. Constructed from 6mm virgin seamless polyurethane which means your blades will last longer as you need less pressure to cut through, and you get MUCH smoother cuts when trimming.

uscutter.com

 

[Humble PM]

Lots of brands and places that sell them, Rhino is the most common, but they're all just a sheet of urethane.
I get ours through USCutter, reasonable cost , lot of sizes, if they don't have an exact size, just get one a bit bigger and trim it down.

Image One Impact Table Top Extreme Cutting Mat - 24" to 144" Sizes Available

Tabletop Cutting Mat, assorted sizes. Constructed from 6mm virgin seamless polyurethane which means your blades will last longer as you need less pressure to cut through, and you get MUCH smoother cuts when trimming.

uscutter.com

If I can get those sort of prices right-pond, then I'll step away from my innexpensive HDPE sheets - they're getting tired and clipping blade tips too much these days.