• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Tradeshow pannel trimmer

Speeddm

New Member
Hi there everyone.

We are looking to purchase an trimmer like a Keencut Advanced Rotary Cutter 100" Just wondering whaqt you guys would recomend.
 

JR Digital

New Member
if you want to trim thick tradeshow pannels, i suggest you dont get a rotary cutter, get a keencut javelin ( mounts onto work bench ), or the sabre. or get a wall mounted trimmer like a seal multi-cut or fletcher. But if you insist on getting a rotary trimmer, the best are Neolt brand. I have 2 and use them everyday.
 

Checkers

New Member
I agree that a rotary cutter is the way to go. It will cut long panels in one pass without issues. Just be sure to get a size that is appropriate for the largest typical graphic you cut.
Hey JR,
What model of Neolt do you have? I ran an electric one for a while and it was a piece of crap. I ended up having to add a bunch of shims to get it to hold media and it got to the point where I partially disassembled it and ran it by hand. Maybe the manual ones are better?

Checkers
 

threeputt

New Member
I was just looking at (on line) the Fletcher machine. Do they require multiple passes to cut DiBond? Is it as efficient as something like a panel saw? (which we have and use)

Looking to cut down on: 1. Noise 2. Sawdust 3. Edges that need filing after the cut process.

Any comments are greatly appreciated.
 
Top