cswhitman3
New Member
I am going to order new ones. I pulled about 10 times and the none of the ink in the lines were moving.
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
VersaSTUDIO BN-20A - Printer not working
- Thread starter cswhitman3
- Start date
Zoogee World
Domed Promotional Product Supplier
Sounds good. As Jim mentioned you can also try a pump up or fill in the ink menu to see if it brings anything that way, but if you pulled 10 times and nothing moved, there could be an air leak or the cap top might not be sealing to the head correctly. Were you hearing an air sound around the cap top when you were pulling?
cswhitman3
New Member
I will put the dampers back in and pull some air through to see if I can hear anything. Right now I am just waiting for the new dampers to come in. What the chance the new print head was clogged as well?
Zoogee World
Domed Promotional Product Supplier
If you bought an OEM one from a Roland dealer you should be fine, but if you bought from a 3rd party, you might have gotten a bad one or not an OEM, so there is a chance it could be bad. Also, make sure the cap top and the other parts you change are OEM, as the 3rd party don't always work well.