VJ 1304 - Printer Setting

[GrantX01]

So I just got a VJ1304 and I am playing with the printer setting to find out what mode I want to profile in and I am wondering if anyone out there has any input. I am looking for something fast but but good quality print. I am using onyx for a rip and have been trying different combination between the quality mode & the weaving settings.

 

[randya]

I find G2 (graphics 2 720x720 8 pass) to be the best compromise between speed and quality for high quality graphics on glossy materials.

Quality modes are slower and may work better for photo, backlit and other difficult media.

Banner modes for banner with B4 being the fastest, depending on viewing distance (6 ft +)

I am Wave 2 and fine kinda guy for difficult media, but most of the crew here have gone to the Fuzz wave forms.

 

[GrantX01]

So far the testing I have done I like the quality 4, fine and wave 2

 

[randya]

Here is the mode break down:

http://www.mutoh.com/products/ValueJet/1614_Print_Speeds.html

 

[GrantX01]

Well after testing I am going with Graphics 2, Fine & wave 2 now to profile. Thank you for the info

 

[GrantX01]

I was wondering if anybody new anything about the heater settings for the VJ1304. I am doing some testing on 3M's IJ180-V3 media. I would like to hear any input