-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
where is this black coming from?
- Thread starter MHester
- Start date
balstestrat
Problem Solver
You've got some cross contamination or leakage going on.
MHester
New Member
Right. I'm trying to figure out the root of the problem.
balstestrat
Problem Solver
Well better get at it then.
MHester
New Member
Figured it out. The maintenance cartridge was full and caking up all the printhead bottoms. My sensor for the maintenance cartridge must have gone bad, because it still says it's "good" with a green light, when apparently it's completely full and needs changed. Swapped out the cartridge, cleaned the printheads and it seems to have fixed the problem. Now I just have a sensor issue to deal with but at least I can print again, just need to check on the cartridge every month now.
balstestrat
Problem Solver
Unlikely you do. It's the same sensor that checks your substrate width and if that's working... Likely just one time thing.