Wiper Protection Error
Sorry for the delay in reply...
I hope that you are already up and running
This error means that the wipers are not where the machine expects them to be... i.e. the sensor hasn't been tripped.
It's a machine protection error which means nothing will work, just in case the wipers are where they could cause damage.
Typically the fix is nothing more than:
- Power off the machine
- Open up cover
- Manually push the wiper carriage back into the home position--until it stops). I may only need to be moved slightly.
- Turn on the machine
It's also possible... but more unlikely that you have a bad wiper motor, loose belt on the wiper motor, or a bad/loose wiper sensor.
We can look at these items if you continue to have problems.
~E