• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

XR-640 Printhead B not printing on last to rows

Hulleman

Hulleman

Premium Subscriber
Hey Guys,

So I got this problem where all the nozzles are doing fine but the last to rows are not. Could this be the captop not sealing correctly on the right hand? Or is that the cleaning nozzles that have som junk in em?
Thank you!

520401313_1834428317115564_3552229285006325968_n.jpg
 
Last edited:
Zoogee World

Zoogee World

Domed Promotional Product Supplier
Most likely not the cap top, as all the other nozzles are printing fine. You can try a 48 hr head soak to see if it improves any. You can also try changing the cap top afterwards if it's been a while since the last one.
 
B

Brian with Walker

New Member
* When using this machine with 7 ink colors (cyan, magenta, yellow, black, light cyan, light magenta, and
light black ), one dedicated cleaning cartridge (ESL4-CL) for ECO-SOL MAX2 is required. Which config. are you using?

1753275736182.png
 
R

Roland Certified Tech

New Member
Hulleman said:
The one with the CL, thank you!
Click to expand...
Every once in a while, you may see some color where the cleaning cartridge prints on the nozzle test print, the far 2 right sections. If that is the case, you might want to look at replacing your captops and performing the cap height adjust. This style captop should be replaced every 12 months at the least. Heads are expensive, captops and minimum weekly cleaning are worth the investment.
 
You must log in or register to reply here.
Top