-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Latest activity
-
netsol replied to the thread Gerber Saber help.ok. got it! the Gerber stuff is nor.amally very rugged
-
Squiggy replied to the thread Gerber Saber help.Thank you for your time. I appreciate it greatly! just to reiterate the machine has not been moved at all. The only thing that happened...
-
netsol replied to the thread Gerber Saber help.when I get to my office I will do some reading. not sure what isn't happening.when you move a machine lots of things can get bounced. I...
-
Why don’t you just verify if the heads are clogged manually -
BogoEN replied to the thread Font ID request - old 70's logo.This is an old post, but for anyone searching for this info going forward, the font is very likely Avant Garde Book, as the earlier post... -
A Signage reacted to tulsagraphics's post in the thread 4 x 4 real estate sign production with
I Appreciate You.
Your post asks specifically about 4x4 coro signs, but your numbers don't add up if you're saying that you spend $70,000 on 180 signs per... -
Squiggy replied to the thread Gerber Saber help.When the machine is turned on there, used to be just one beep now there’s a series of beeps and it immediately errors out. I don’t...
-
Martinnz.b replied to the thread Mutoh DrafStation RJ900c.Technically yes. But you have to unlock printer for third party ink. Do you have correct profiles for it? Parts to replace. Ink tubes... -
netsol replied to the thread Gerber Saber help.what happens when you leave motor connected electrically but not bolted in? turn machine on, does motor turn, "step" or "pulse"?
-
Martinnz.b replied to the thread Compress IUV1200 issue.Is the problem solved? -
Squiggy replied to the thread Gerber Saber help.Thank you for your replies much appreciated. Attached is a picture of the motor and encoder on these.
-
-
Jim Hancock reacted to Roland Certified Tech's post in the thread Roland VersaCamm SP540i Rolls Material out unevenly. with
Agree.
Cracked pinch roller assemblies -
netsol replied to the thread Gerber Saber help.i have lots of gerber edge and plotter experience but only seen pictures of a saber if my suggestions don't steer you in the right...
-
netsol replied to the thread Gerber Saber help.i think you should follow the normal gerber evaluation routine we always use blow out with compressed air reseat all the plugs and...
-
-
Squiggy replied to the thread Gerber Saber help.Sorry if I am brief on details, I’m really not sure what to include. The router was working fine. We were preparing to move to a new...
