• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by akuarela

  1. Need Help HP 365 Service Manual

    Yes, thank you, Jose Angel. Do you need it?

  2. Need F-170 or F-570 profiles

    Hi, I'm new to sublimation and cannot get anywhere close to the colors that should be with the profiles I have available. I don't have any of the profiles I'm asking for, as I have a converted Ecotank, and put in there M49 inks. If you can share, greatly appreciate!
  3.

    Wrestling Room at High School Signs with multiple names

    I’ve ordered some printed magnetics from Signs 365. It’s a thin material but looks very nice, they’re uv printed . If all the same (not your case) can order them all cut up and even rounded. If not, can order a sheet that you’ll cut. The only thing with them is that you have to round up price...

  4. Cleaning HP Latex Printer Rails with 95% Ethanol

    Rubenmutt, I think that material is almost or the same as the synthetic chamois used for cleaning cars. For the other cleanings, I use a polyester lint free cloth used for cleaning uv printers @Amazon : Cleanroom Cloth Wipes 9"x9" (Bag of 150 Pcs) Double Knit 100% Polyester Wipers Lint Free...

  5. Service maintenance kit 3 for HP Latex 365

    Got it already, thanks.

  6. Direct UV or Laminated vinyl for outside?

    If it's a flat surface, I wouldn't be using cast vinyl, but be using uv protection laminate. I'm on the fence with direct uv prints, not as durable as a printed and laminated print, if laminated, you want to make sure the ink is not going to pull out of the substrate. My to go material is...

  7. Need Help Need HP Series 300 Service Manual please

    Tomz525, thanks so much!

  8. Need Help Need HP Series 300 Service Manual please

    For my HP 365 - From some of the older posts, I see some of you have it, but have not received a reply and I'm in a bit of a bind today. Thanks!

  9. Service maintenance kit 3 for HP Latex 365

    kcorcoran, please, I also need the manual for my 365. hannysbf@gmail.com Thank you!
  10. A

    Kcorcoran, could you please send it to me as well, please? I thought I had it but apparently...

    Kcorcoran, could you please send it to me as well, please? I thought I had it but apparently with our move it got misplaced in some computer. Thanks! hannysbf@gmail.com
    • akuarela
    • Profile post comment

  11. Graphtec FC8000 Push Roller Replacement

    Question: Can you remove/add one of these without having to take off the rail, etc.? It seems so, from your pics. Oops, I just went to check and it's not hard to remove the rail, from the 2 little screws on its ends, although for now I'm doing that. Thanks.

  12. onyx postershop 12.1.0.9441 driver for HP_Latex_3x5-Series.PrnInst

    I looked but have it for version 12.2.0.2223 only
  13.

    Rate my very first sign

    Also, if you have a laminator, I would recommend applying the transfer tape with it. Since we figured that out, relatively late after we had our laminator, bubbles-b-gone, specially if you also install it with the laminator itself (half and half is what we usually do).
  14. A

    Comment by 'akuarela' in media 'razzsign'

    Beautiful!
  15.

    Font Help Need help identifying a font

    https://www.typerbole.com/images_The_Greatest_Fonts_on_Earth/images_Font_Collections_by_Foundry/Brainreactor_Font_Collection/Brainreactor_Font_Collection.php but it doesn't seem to match
See more
Top