• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Dan360

  1. Hi-Viz reflective Red stock in Canada

    That looks like Oralite 5860, Spicers carries it
  2. CBRE New Branding - What is this font!?!

    Financier Display
  3. adding crop mark tabs over existing crop marks

    Colour the crop mark in with sharpie or micron pen and then use whiteout around it (just get as close to the mark edge as possible on all 4 sides), quicker than trying to line up vinyl. It's mainly looking for the edge, you might not even need to colour it in.
  4. Roll Up Banner Profile

    We've settled on Briteline Rollup, after trying many brands, running on generic polyester film at 8 passes.
  5. Install vinyl on rolling garage door

    We've done a few of these doors, full wraps. Do an adhesion test, 1 of the bare metal ones we did needed high tack. Install, remove mask and then cut. If that's the type with a hard 90 degree edge, double cut, the ones that roll in we slice in the middle and tuck (Prime first to be safe and you...
  6. VHB tape container

    Have a look at disc golf storage boxes, they have nice carrying bags that would work too https://www.amazon.ca/Dynamic-Storage-Drivers-Frisbee-Organized/dp/B089T2RF6F
  7. Paper cracking when scoring

    Could just be the paper. You could try scoring it perpendicular to what you are now and see if its an issue with the grain. Also check to see if it cracks when you fold it the other way, scores typically want to be folded in one direction. Pics might help.
  8. PSA 832 Ink Recall

    Our Grimco tech called HP to see what he needed for a service call, they told him to check if the ink expires 2025/01, both did. They're sending us replacements. Swapped to a different cartridge and ran ink through and we're back in business
  9. PSA 832 Ink Recall

    Just found out the hard way that there is a recall on 832 black ink that expires 2025/01. Black prints brown and fuzzy with them, check before you put in, put us down for a day.
  10. HP360 OR HP 700?

    We have both, the 360 is less consistent with those colours than the 700. That being said, the 700 isn't as consistent as I would like it to be. I would look towards some solvent printers if we needed very accurate colour.
  11. HP Latex Maintenance question: any lubrication oil alternatives for DB2-68?

    Those oils last forever, I think I've ordered 3 of those kits since getting the printer and still have 4 bottles pretty full. Every half roll is a lot, surprised you're not seeing it drip onto prints. I clean/lube once a month.
  12. Has Anyone E V E R Gotten................................................................

    I grab our press operator's press cleaner whenever alcohol doesn't do the trick. (Or when I drop toner everywhere or tip a maintenance cartridge)
  13. Need Help Vertical banding

    I got it fixed but not sure what part it was. I had to do SMK3 on the printer and really cleaned everything while I had the printer apart. After I put it all back together, the problem went away. I talked to my HP Tech and he wasn't sure either, might have just needed a really good cleaning.
  14. HP360 86:01 Error - Paper Jam, but no actual obstruction - Carriage seems difficult to move

    FWIW I had a very similar situation with our 360 about 3 years ago. Everything was pointing to motor but motor was replaced the prior year. I ended up fixing it by turning off the printer, cleaning and then lubing the rails (top and bottom rails, with carriage parked at both ends) maybe 3-4...
  15. Need Help Wall Wraps

    We use the 3M adhesion testing kit
Top