Recent content by dispen

Hello after many years! I will answer my spare part question: CAP ==> I prefer digiprint-supplies.com spare cap (compatible one for €9.0 app). I am happy to use it. Damper ==> I have to use the original one which is too exprensive; but I have no reliable compatible option. Head Cable ==> I...

Possible Solution Hi, I have 5 JV5's which use DX5 printhead. I might encounter same issue. The reason of your issue has to be related to dampers. So, you need to replace dampers until dropping stops. That is what I am doing at least. I buy cheap dampers (1.5-2$) from various sources and...

Hi, We have 2 JV5's and 1 TS5 running. We can assume that JV5 and TS5 are same in our perspective. We are in textile bussiness which means our ink is sublimation type. The thing is, we replace each head in 1-1.5 years average. I guess that seems unbelivable to some. The difference of textile...

As it is expressed before, captop clogging might cause ink contamination (such as black into yellow lines). In case of older printheads (say above 1 year) it might indicate that printhead is about to die. I am not saying that is the only reason; but that is one of the chances. To understand...

Hello eveyone, We have 2 JV5's and 3 TS5's. I have to say that we can use F160 and F187 DX5 printheads. It does not have to be original Mimaki dedicated printhead. We have been using this way for three years and I see that it is highly possible that people aren't mostly aware of that ability...

Hello All, We are in sublmation bussiness. XF-640 has two printheads (DX7) It has been 1 year and 9 months since we bought our first ROLAND XF-640. I think, I might assume myself as true tester for that device. 1) In 21 months, we replaced 3 printheads (one replacement was this week) ==>...

There are Chinese and Japanese printer companies you can check. I personally advice one of the approved printer production companies such mimaki, roland and mutoh. There is a very interesting tip about print heads. You MUST keep in mind about printhead replacement. Mostly; Mimaki, Roland and...

I hope you will have nice bussiness thanks to the video.

Hi, It is highly probably that there is some kind of residual piece which rubs the media on scan direction. The color of the streak is same with the preceding font. That is a simple evidence about my claim. I advice you/your employee to move print head (while it is turned off) to the left...

Just a small reminder; Maybe you need to check the cable between the sensor and slider board. Just a connectivity test between two edges of sam cable and short-circuit test between parallel cables. Maybe you need to focus on the cable. Regards...

I experinced same issue. We have JV5 which was used by other customers. When we encountered that issue, we called tech and he checked whether Carriage rail was soft or too hard to move the carriage. He recognized there was really much amount of dust on the rail which prevented Carriage...

Mechanical Drawing of XF-640 Hello All, I found ROLAND XF-640 mechanical drawing which will be quite helpful for me in case of any spare part requirements: https://digiprintsupplies.zendesk.com/entries/69399349-ROLAND-SolJET-Pro4-XF-640-without-Links (Firstly, you will need to log in to see...

Observations about banding issue Hi, I will share my observations about banding issue. So far, I am sure that I did not encounter banding issue with ROLAND XF-640; because we are not in sign bussiness; we are in sublimation bussiness. We print on paper; then, we transfer the pattern from...

It seems that no one has it.

Hello All, I have ROLAND XF-640's; but sometimes I need the Service Manual to figure out error codes and cause of problems. Is there anyone who has the Service Manual? Thank you...