• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Paradox Group

  1. Need Help How to recover nozzles in a KM1024i 6pl head

    How can I clean a KM1024i 6pl head that has 2 missing nozzles

  2. Need Help Mimaki JV100 driver and RL7 issue

    I have done this it did not help I still am unable to open RL7

  3. Need Help Mimaki JV100 driver and RL7 issue

    I am trying to install a new JV100-160 and although I have installed the ver. 5.7 driver and RL7 ver. 3.0.0 I get an error "RasterLink7 cannot be started because Mimaki Driver is unavailable or not installed. I do see the driver in the Device Manager.

  4. Need Help SIJ

    Thanks for your advise but this unfortunately is not much of help may Guy Clark rest in peace. There is no more information this is a Mimaki SIJ3.2 printer and I get this error when the printer initializes " !HD HEATER BREAK" with no other number or indication If you are familiar with this...

  5. Need Help SIJ

    I get this error when the printer initializes " !HD HEATER BREAK" with no other number or indication Aaron

  6. Mimaki 1d8 error

    Hi to all, I when starting a Mimaki JV300 printer I get this message "1d8 head Xhot" I can't find this error in the maintenance manual Aaron
  7.

    Need Help Mimaki UJV100 issue

    I am not sure about the Led 16 if its on or off this I will be able to check later on, I was in touch with a Mimaki dealer and he suggested that the UVLED Dr PCB is faulty and has to be replaced due to a faulty cooling fan. PCB part No E111611-A
  8.

    Need Help Mimaki UJV100 issue

    Apparently just before getting the above error we get this error for a few seconds "ERROR b0f DI0 PCB UVpow" Aaron
  9.

    Need Help Mimaki UJV100 issue

    Thanks for your response We have checked all the fuses and they all are OK Aaron
  10.

    Need Help Mimaki UJV100 issue

    We have a UJV100 printer and when switching on we get this message "SYSTEM HALT (1) b1e:PCB Base IO-F10" there is no information about this error in the service manual, can any one help us ?
  11.

    JV300 sublimation issing nozzles

    Hi, I have an issue with a JV300 using sublimation ink, it started having missing nozzles in head No1 M left block all the rest of the head nozzle were perfect, we tried all the normal cleaning and fill up at all the levels nothing helped so we, we then connect a syringe using a Y connection...

  12. JFX 200 2513EX & Braille

    I will try to explain, in order to print braille one has to print first a few layers of clear or white (the amount of layers depends on the printhead type) one on top of the other and finally print one layer of color if needed, a true braille printer will print the layers of W or CL back and...

  13. JFX 200 2513EX & Braille

    Sorry to tell you but printing braille on a Mimaki JFX is absolutely not feasible.

  14. Need new flatbed - Advice please (NOT HP...)

    This is a fantastic printer we have installed two pcs they work perfect with Ricoh Gen5 heads, price is very reasonable and very cheap to run. https://www.liyuprinter.com/en/platinum-kc-ricoh-gen5

  15. 3D Printer for Braille?

    You should try ArtisJet at http://www.artisjet.com/index.php/en/en-products/en-led-uv-printers/en-artis-5000u this works perfect for Braille printing
See more
Top