Recent content by StefanG

Did you take off the protection tape on both sides of the encoderstrip? you wouldn't be the first one to forget to take it off ;) If you did take it off, check indeed the encoder sensor for dust

Thanks for your input guys I don't want the hassle with changing things in the software, so probably best to just order the gold heads and wait a little longer. I did search for alternative suppliers, but they all charge around 750 euro for one head, and at digiprintsupplies is around 400...

hi all, Im going to replace some heads on our lef2-300, and was wondering if i could also fit the "normal" dx4 heads instead of the "gold" heads? the gold heads arent in stock and would take around 2 weeks to be deliverd, and the normal ones are on stock. from my understanding the coating on...

You're the best. Somehow I didn't get this manual when searching on Google. Thanks!

Goodmorning everyone. We recently had a media jam, which scratched the heads and they asked me to replace the heads myself. Is there or has someone maybe a service manual for me? thanks in advance Stefan

Changing subtank is pretty easy like Smoke said just start the printer and hold remote and function buttons untill you hear a beeping, so the printer will start in maintenance mode. When its started and ready, press function - #adjust - Subtank - discharge. This way the subtanks will fully...

Will do this if i have the problem again, but so far it still seems fine, fingers crossed. ive done it a couple of times, but if it was that then the whole cutting would shift, and not just the begin and end mismatch Done this also, and that is set correct

it was on off, so i put it on starting point but that didnt seem to solve it. one thing i did check was the belt that drives the knife and noticed after that, that the knife didnt start correctly, although the knife calibration was good. So it didnt start straight, but a little bit rotated...

Good afternoon from the netherlands. Since a few weeks we are having a problem with one of our summa cutters. The start and point of the knife doesn't match anymore as you can see in the attached photos. the starting point is always on the right side of the sticker. a few things i have tried /...

To follow up on this. We changed the cappings, and the problem seems to be fixed now :) Thank you guys

We have had this poblem also before on our S80600 mechanic then changed the Duct / damper and the problem was solved

Thanks for the reply, Yea that was the one of the few things left that come into my mind. Also thought it might have been the Solenoid valve, but i swapped that one with one from an other machine, but that didnt fix anything. So gonna change/check the cappings today if i find any time. Heads...

Hi there, Since a few weeks we keep having air inside the system. Mostly on Black In the beginning we could do an airpurge and some cleanings and the problem was solved and we could print again without any issues But now the air keeps coming back in no-matter how many airpurges we do, it seems...