Search results

Anyone printing on 751c with latex? Trying to print with latex 115 on some calendered vinyl before trying cat 751c. Having problems when curling of the substrate? How low can I put the curing temp? Can I adjust dryong time? Any suggestions would be grwat. Had no issues with my 1324 on almost...

Got my new printer yesterday. Heavy beast compared to my 1324 Have setup and first few errors i successfully printed some test runs. Quality was good if a little slow with the curing etc. However when I removed the substrate the vinly started to roll itself up from the edges (not the wound...

So i know the FX model is a cut down model with only 3 rollers instead of 4 and with it limited vinyl widths Is the D140RL and D140 the same? If not - what are the differences? Any advice would be appreciated According to my independent research these models are re branded as HP for the HP...

So the HP basic cutter has set ups for attached widths of vinyl However these are 11 and 16 and not and 15 which are pretty standard to me, Does anyone out there have real world experience with this cutter? Can I use a 15" vinyl roll and not lose over 4" bu having to set it up on the 11" mark...

So I have replaced the maintenance station and still having some issues If you look at the photos below I am having most issues with blues and this changes on the type of blue I use Some banding is also occurring as well as the spatter/shadow effect Any ideas? 1. Encoder? 2. Dampers Head...

Can someone tell me if the maintenance stations for 1204, 1304 and 1324 are the same? I need to buy a new one for my 1324 and I see generics for 1294/1394/1694/1614 and assume it is the same one but would like to know for definite before I purchase Thanks

Any one know anyone that could service a Mutoh 1324 in the Mid-Missouri area (Moberly, North of Columbia)? 1324 is playing up and I have replaced maintenance station before but would pay a tech (if I can afford it) to do it and trouble shoot some issues

So printer was working great all day yesterday and then all of a sudden not firing on all nozzels Have done many many head cleans and after each one I get some printing but it goes bad on the next print. There us a horrible clicking/grinding/jerking when printing and I can't tell if it is...

8 x 60 ft banner for side of corrugated metal building. Would 15 oz material be enough? Should we go to 18 oz? Client is thinking of using wood blocks every two feet or so to bolt the grommets to. The banner then might sit if the wall a little. Would this be a problem with wind etc Any...

Another one I know I have seen but can't find... Thanks

Cant seem to get the Above and Beyond part - looks really familiar too! Thanks in advance

need some help on the economy Ag part - - could not get it in find my font Thanks

Midwest Infidels please and thank you

Have been asked to replace a lighted sign facell 4x6. What substrates are available from grimco that I can use? I see acrylic but I don't see lexan or polycarbonate that I hear a lot of you sign guys recommend. Unless they are under a different name. Any suggestions? I get free...

Sorry double post - not sure how to delete

Ok so after hours and hours of toying with it I got it to work but I have weird issue. I am trying to print and cut a file from flexi. It is just 12 x 18 and not a huge file When I set it up to print and I ask it to print towards the edge of the roll I get the rip to go to 48 or 96...

I think the vinyl express Q75 is a rebranded Graphtec. I am looking for replacement bladed for the substrate cutting tool - not the actual plotter blade if that makes sense? Looks like I chipped the tip off it. Any ideas what it would be called or where I can find one? Thanks Mark

Largish window 67wx81h. Large image smack bang in middle. Would you install in two tall strip at the center of the 67 or do a max width say 52 and a 15. My head says two halves and hopefully aligned correctly. Thoughts?

I don't do much perf. I have a request for the following 2 windows 36x81 1 window 67 x81 I understand the bigger one would be two pieces I can print myself or have it printed and then I install. Where would you guys be on pricing? Ball parks are good. I just don't want to go...

Can't separate the letters in find my font? and my computers are acting like they are sleeping today Any help is appreciated