Search results

I have a client looking for a sign for several playgrounds. They need to be extremely durable and kid resistant. What substrate has been working best for these type of applications? Also, which vinyl/ overlam would be best? I currently use Arlon and Oracal to print on and various laminates.

I am having issues with the laminator take-up device not keeping up with the rollers. it is a brand new unit and just started experiencing this prob. the roll holder has new rubbers to hold cardboard roll tight. Any hints or tricks to figure this one out? Thanks Randy

Is there a color chart for Corel X3 or X4 that depicts good flourescents? I have some hunting banners that need printing and have no idea (unfortunately) where to get those color profiles. Any help would be greatly appreciated. Thanks--Randy

When i am cutting from Corel X3 my lines are jagged. not all of them ,but mostly text. i cut direct to roland without using "cutcontour" as outline, if that makes a difference. are there any reasons like need to convert to curves, or something simple like that i can try? its not terribly...

i am trying to make some lettering have a gradient fill. but when i "fit text to path" or "envelope" the lettering, it changes the gradient and does not allow it to do a smooth curve like the letters. (pulling hair out...at least what i have left) thanks in advance for the help. randy oh...

new to Omega 3.0 and trying to put a fill inside some lettering. wondering how, as the manual i have does not go into this detail. (at least i cant find it) wondering if there is something like the POWER CLIP in Corel. thanks randy

is anybody using this plotter to cut their edge graphics? if so what are some pro's and con's? thanks randy

where can i get either a used or new cutter to go with my gerber? i am also looking for a roll holder, or will one of those transmasking rollers work? i think thats what it is called anyway. thanks all

until i can figure out my edge, where can i have some decals printed on chrome. i could probably figure the print part out, but cant contour cut like they need to be. i have the file in corel so....

okay- after looking through everything i was givin with this machine, i dont think i have everything i need to get started. here are things i think i may need: feed reel/ vinyl holder various cords- easily acquired though A CLUE!!!! yes i admit to not having a clue on this unit. does...

i am trying to get a "glowing" effect behind some lettering. how can i get it to look like neon so to speak? thanks randy

not sure what all i have or need here, but a local sign shop recently dropped a used (obviously) Gerber Edge on my doorstep. along with a computer and i believe the software is all loaded on it to get it going. i just have no clue where to start with it. are there any resources to help on...

my cutter has started to not completely enclose the cut on a letter or circle or whatever i am cutting. i have always had my offset set at .25mm and it has worked flawlessly until now. i did change to aftermarket blades, but have used them for a while without problems. any help is greatly...

i have the opportunity to get the above router for a very reasonable cost. here are the questions... is this machine worth the time it would take to learn to operate it? comes without training. are there any service centers that would come out and set it up for us? would it be better to...

i have a roland cx300 plotter that has recently started cutting funny. what is happening is it will not totally cut the line. it is almost like a dashed line. i replaced blades and cutting strip and it still doesnt fix the problem. is there a possibility of it being the blade holder or...

has anyone tried using a roland camm-1 cx-300 series cutter to cut magnetic material? do i need to mask the back of the magnetic material so it doesnt "adhere" itself to the machine? also, what degree cutting blade would be recommended. (i currently use a 45 degree one for most of my cutting)...

i am currently looking at getting an entry level printer so i can start doing most of my digital work myself. i am having troubles deciding which route to go with. here are some basic concerns/questions regarding getting into it: ----what type of system is best for all around durability...

hey all. thank you for such a resourceful forum. i aint much for posting, but reading a lot of good info here. i currently only to cut vinyl. have been doing it for about 5 yrs and love it. now it is time to maybe step up and start printing. but not sure where to start. hope to enjoy more...

i have been browsing site for some time, and now have a question. i am looking into the digital graphic arena as we currently farm it all out. i am curious if anybody is using or has heard pros and cons on the designjet 5500 UV printer. any help to a new guy would be greatly appreciated.