Search results

If the test print of the machine show all colors and the rip does not print correct colors check in Flexi there is an option to print in BW only...............check if the option is not checked. Paco

If you print in flexi you can add the CYMK bottom and top test print lines which are horizontal which then are horizontal. Hard to tell if this print blocks is left to right or top to bottom and if the banding is transport or nozzles missing. How does the machine simple test print look like when...

First get the machine simple CYMK test print to work and showing all colors as I see yellow and cyan are missing gradually or am I mistaken. Some cleanings might do the trick or print some larger CYMK blocks. Is there inkflow while the machine cleans to the waste bottle. Undefined paper could be...

Duane witht he trouble shooting we did we are almost at the end of the possibilities what can eb the cause. If you only pull air then the capping station, then 99% this is the problem maker (or pump). This could also be the cause why the magenta is starting to fail. If there is good flow from...

Never seen such item.

Try to pull the ink on the capping station,,,,,,,,,,,,,, Check if the foam in the cappingstation is saturated with cyan-magenta-yellow from left to rigth,,,,,,,,,,,,,,when you pull. Paco

Duane. 1] If you pull ink with a syringe at the output of the yellow damper does it pull ink easily? 2 If the yellow damper is put on the head and the head is parked on the cappingstation and you pull with a syringe on the output of the cappingstation color side for all the three colors...

Let us know the result and how you peformed the cleaning. Paco

Keep cleaning with soak method to see if there are more nozzles coming unclogged. You can also pull with cleaner fluid and syringe with care on the black head peform low pressure pull through from cappingstation. Always perform test print after cleaning............ Paco

First ink should flow from ink cassette to head. Cleaner fluid tried to flush the tubes? Paco

Dont eat the lollypop! just cut the tube from it. Do not know if it mechanical is possible is to swap the tube and dampers for exmaple cyan and yellow. or the nearest to the yellow. If then the yellow is going through the cyan part of the head and the cyan is not going through the yellow part...

Tube of a lollypop? :-)

Ok if you bleed your way but always be gentle with the underpressure while pulling it is not a car brake system. For the troubleshooting................... But if the syringe trick doesnt pull yellow from the cartridge side then that is the first thing to check more. If you release the...

You can keep complain but you can als head a positive way as long as it prints something. 1] Show the test print so we can see what fails. 2] Did you perform any cleaning sofar? 3] How look the dampers? Empty-full-half full. 4] Does the wiper move/slide or is it stuck due to dried up ink? Let...

Flexi 8.1 will work too and there are dongleless versions moving around on the net to start you up. Just look around. In mean time just perform some manual nozzle check to keep the heads clean. Once the other day is enough. As said if the ISIS is 100% working buy a 30$ XP machine with a...

Does the machine does not come with a rip? You need a RIP to print, it does not use a simple windows printer driver. If the machine comes with an older Onyx 6,5 it only works under Windows XP. Older rips best work with XP. Make a dedicated RIP PC no need for high specs. Paco

Maskman, good to hear it works again. All info is maybe usefull for others with the same problem to troubleshoot. Paco

Last try. if you move the head in the middle and start the machine does it moves to the right if yes how much. Paco

What if you turn the large screw a few turns anti clock wise?I just checked the head move fully to the right to activate the air release levers and then bounce back a little to the left. I also have bend upwards the headclip. I always move the head after use in capping position manually. I run...

First take the front cover off that works a lot easier. If you do the Y ensor test does the values change if that is the case it is OK. When the head moves to the right is has to move over the capping station and move it further to the right to lock it aginst the head. So if you remove the...