Search results

Dont give up......................

The fact you tell there is no inkflow from the colors to the waste bottle means there is an airleak or no suction in the tubes running from the cartridge to the cappingstation or the cappingstation is not working. Put the head on the cappingstation and place a syringe on the white tube of the...

Dont give up we had more severe cases solved here.................:-) If the right front of the machine is removed and you can see the whole cleaning process check for the pads in the cappingstation at the end of the cleaning cycle are fuly wet and the ink is purged away from it. As in the...

Greg, the colors and black for this machine are in two heads. Though swapping heads my a cure to trouble shoot. Paco

Here a close up of how my testprint and CYMK test print looks like. The black has some deflections which I have to clean away with a swap in cleaning fluid. Printed on Arlon 4560GTX with 50/50 heater temp setting with Flexi 8.1 with custom profile. Paco

Machine selftest showed left top nozzle missing. Is this still the case? Do not look at green but at cyaan print quality. if cyan is not 100% the green will not be either. Is the color head new? Is the wiper new? Did you use a cleaning stick to clean/rub the color head? Paco

Did you try other lower temp for the head heater?

Like jackpine said, Black needs a mechanical aligment compared to the color head (see service manual). All colors miss one or more nozzles which directly reflect in the banding in printouts. Red and green are composed by the CYM colors so if CYM nozzles are missing this also reflects the...

show us the results by picture of this test print and the current nozzle test https://dl.dropboxusercontent.com/u/...%2030%20cm.psd Paco

Diamond is for 1440 dpi, man is for 720 dpi rabiit is for 360 dpi. RIP Settings overrule machine settings. Like chester says in flexi you can set the print resolution. 720x720 is normally OK. I tried 1440x1400 and all other options but due to the high inkdrop size there is no imporvement when...

Brian, First try the 30 cm test file. Then the 110 cm file. https://dl.dropboxusercontent.com/u/14421088/cymk%20test%20file%2030%20cm.psd https://dl.dropboxusercontent.com/u/14421088/cymk%20test%20file%20110%20cm.psd Paco

You have PM.I will make a test file.

Try printing a job with white spaces of some inches between some horizontal CYMK colors bands machine wide. What happens if you print full color cymk horizontal band ( not vertical ) of small witdh lets say 20 cm does the banding appear at same distance from the first start of the print. Paco

Head alingment is your solution. send me a pm and i give you the link to the service manual. Paco

Head aligment is like SC said try and error. As long as you know what you do you will get there in the end with a working machine. Paco

this has nothing to do wit a reset, head alignment is what you should perform. look in the service manual.Paco

Which machine?

Tell what the problems are.......

For compatible problems I have bought a second hand PC with XP PRO on it I only use to RIP with Flexi 8.1. Cost 5 $. The world is filled with these PC people like to get rid off and even give them away for free. Paco

Duane, I was wrong. THE VMP does have rip/print functions. http://www.vinylmasterseries.com/en/products_vmx_rip.html. Paco