Search results

Check, inkflow from cartridge to damper and from damper to head. If it vacums by high inkflow it can settle slowly overnight when not in use. Paco

No this is the abbility of the machine. What are the heater settings for both vinyls used? What are you printing that needs high quality? Attach a sample. Paco

With this machine in Cyan and Magenta banding is more Obvious then yellow! Looks like the head alingment is still not 100%. Between the cymk lines machine wide there should be no white inbetween. Does it do it on all vinyl or just the Substance vinyl? Take notice this is not a 3000+ dpi...

I cant see what you have done to get the yellow back and caused a problem elsewhere. Please explain what you have done each time to solve the problem. If you suck with the syringe from the cappingstation with the head parked does magenta flow. If you watch the cleaning cycle see you magenta...

Try to pull ink from the yellow damper exit. If it does not then the vacum pulled the cyan ink from the cappingstation into the damper. Try to distinguish where the block is. For the screen pop up. This tells you the current standard setting is changed and if you like to use the new setting...

James, When you are addicted to drugs or alchol there will a goverment supported organisation somewhere that will help you to get rid of your problem with care and love. When you are addicted to wide format printing your on your own! Dont expect any help form your goverment, your addiction...

see screenshot of flexi in advanced tab.

The cappingstation foam is swollen and causes cross contamination when the head is parked. check the foam for being flat. Always print in flexi with color band at bottom is on. when this does not start with cymk stop the printing...

Just follow all settings for adjustments from the manual so you havent skipped anything. For the profiles, I run Onyx 6,5 rip and Flexi8.1 For Flexi I create my own icc profiles. I use one I use for Arlon DPF4560GTX, 4500 and 8000 let me know if you need it. Paco

Step 15 to 19 on page 161 of the service manual. Try large values to see what happens.

just change the head ranks when you switch heads if that gives better feeling. it is not much work. it is not ok the yellow got emptied. is the foam in the cappingstation not so saturated that it has touch the head when parked?

Loosen up the dampers from the head. mark the heads :-) Switch heads. start printing right away. If the problem is in the head it does not matter what colorink it prints and it moves with the head. If it does not move with the head it is everything before the damper. head rank is for fine...

Hummm, I asume CW setting when you change and press return it once again print the change as manual describes? paco

Brian, problem solved? Paco

page 129 then Step 15 to 18 on page 161 of the service manual. Try large values to see what happens. Paco

Hi James, Nice to hear you could solve it. I own a Junior 38 for two years. Step by step I learned the quirks of this machine which are easy to solve. I clean the machine once a week and check the cappingstation. Also the wiper I replace every 3 months. Make sure that you can see the inkflow to...

You can also bend the metal lever that prevents the lever from raising to the outside so the lever can Always pass it. Then you have to take care you do not use the lever when teh machine is in action. Paco

To use the self-diagnosis function, you should first display the self-diagnosis menu on the operation panel. The self-diagnosis menu is completely independent of the normal operation mode and self-diagnosis display mode. To call up the self-diagnosis menu, follow the steps below. Step 1 : If...

picture please

Only if the head unit is parked at home position you can raise the paper pressure lever. So it looks like this position is not reached. In some cases the metal clip that keeps the head at home position is bend downwards to much. REmove the righthandside cover of the machine so you can see the...