Search results

did that many times in the past. Mostly black logos on fluorescent (I used 6510 not 7510). Problem if there are some bleeds: it curls a lot after few days (I use mild solvent inks and black 30/30/20/100). Without bleed: no problem at all. I found that laminating reduces curling problem...

be carefull with the mimaki spec, I own a CJV30-100 (RIP is RasterLink) and I'm not able to print more than 100,5cm although Mimaki says 102cm.

hello, what does this light help for?

... but no service manual...

what's the CMYK code you use for black?

ok, then aggressive solvent inks. Sounds great if you never experience any curl!

To solve such problems I simply place a mate clear square of laminate over register marks, even on chrome vinyl. (works great on the mimaki cutter, i hope it will still be ok on the graphtec FC8000 that will soon come). Thanks for the tip with the vinyl you use (much too expensive for my needs...

Until now I have no found any metallic chrome silver that I can print with my mild solvent mimaki. - RTape vinylEfx: prints very good but curls like a hell - Oracal 352 claimed printable: simply does not print at all - some others only have non permanent adhesive which does not fit my...

http://www.signs101.com/forums/showthread.php?t=25160

which Oracal tape reference do you talk about please? Oracal (Orabond to be correct) have several references for such purpose.

without the panels size, difficult to answer... ;-)

still don't know which Avery vinyl you used...

Hello from... Strasbourg ;-)

there is only one position for the blade on a CJV30.... In order to use half cut: it works like any other cut but select the cut configuration "half cut" instead of cut1 or cut2 cut3 or cut4. I recommand to cut once with any of the cut1 to cut4 tool configuration and once more with the...

is profiling easy for a beginner or must it be done by an experienced tech.? Is it just connect the spectro and run the software or are there many tricks?

also tried like this but Rtape vinyl even curl without print and clear printed vinyl on it. :banghead:

I've tries vinyl from Rtape (fx range) and my experiences were very bad. Never seen any material that curls so much, OK Rtape says to use coating pen on the edges but does not works so much, prints not not stick after few weeks. My provider told me not to print near the borders, great solution...

I would like to use it for very precise decals contour cut (the integrated cutter in my Mimaki CJV30 is not that precise) but also trim some startnumbers printed in tyvek, some posters in 130g paper and cut decals out of backing paper. Would a D version suit the need (especially cut Tyvek material)?

between S class D and T, what kind of thing the first one is not good at? Is accuracy the same for both?

that's what I thought but I had in mind that the fans could exhaust the solvent from the print more easily so that it dryes faster.