Search results

what version of Illustrator do you have?

In the transform palette just to the right of where you enter the height and width, there is a little chain link, click on that and it should size the height to what ever width you enter and vicea versa. either that or you can hold down shift when you grab the corner of the bounding box.

I may be wrong on this, and maybe you could help me, but would the other two colors on the print head still fire if the the cable was damaged, loose, or otherwise? I am confident that the cables are connected properly, but was basing that confidence on the fact that the other colors on the head...

Thanks for the sounding board

I removed the other two dampers form the head and capped the fittings so that no air would get through, then used the syringe to make sure that it was only sucking form the magenta. Ink was comming through, so I put it through a power clean, still no dice. It must be somewhere in the print head.

Typically that is how I have corrected the proble in the past, but for some reason it didn't work this time. It's almost as if the print head is not telling it to fire. Is it possibe I got a defective new print head?

I was having trouble with my Falcon I outdoor 48" originally there was a head crash so I had to replace the print heads. However after replacing it will not print Magenta during the nozzle check. I checked all the feed lines and none had leaks, the dampers have ink in them and are air tight...