Search results

old post but i found that you have the DUAL CMYK for a VS540 or 640 my email is cymsale@gmail.com

head flat cables try to disconect and conect better change them right now, maybe already the head blown out if you can’t see colors any more don’t turn on the printer before verfifying the head flat cables before disconect flat cables disconect printer from outlet and discharge capacitors...

head flat cables! you can try to disconect and reconect or change them right now if not, you can blow out the head, fuses on the main board or main board itsealf

are you using profiles?

go for any eco-solvent printer as a print tech i recommend mutoh

you said you clean the head how you did that? soack the head in cleaner? is the head board wet? did you make sure that the head board was dry before connected? (between manifold and head the green board on DX5 can retain cleaner after soack, NO BUENO) check flat cables connections hopefully...

what brand is the printer? check triacs on the main board and related capacitors... one triac or capacitor can be bad easy fix if you don't have experience with that send me and inbox i can help you free... i'm in houston tx... if your main board works you can pay if not nothing to pay!... cheers!

check your temp files under your user account and erase them how many file you have on your desktop? if you have your desktop full of files, all of those files are expending ram every time you open windows, move those files to your docs or wherever you want and create shorcut for that folder for...

some pressure changes can affected the behavior of the ink, check dampers and caps they can be old, check the pump too if it’s closes ok

hi do you still have solution for cerox 8264e printers? Ty

encoder! did you clean the encoder?

before start to expend money changing dampers or caps you need to check the dampers first and caps and pump 1.- do you have ink on lines? is your printer not to old? dampers are ok, maybe they can be clogged, i changed more than 500 dampers on my 12 years technician career and only 5 dampers...

start form the beginning, first check cap station and pump, if you have good suction then the problem is in the magenta inlet, can be cartridge clogged or inlet needle clogged, most of the time in bulk system is the cartridge do you see the magenta connector? the white nut? disconnect it and see...

What printer you are using? do you have color profiles assigned? looks oversaturated because the profile that you are using is incorrect or you are not using any profile, is not a problem if you don't have profiles assigned but you need to adjust the CMYK ink limiters (last tab in flexi)...

this is a repeated pattern that tells me that the blak head is 50% clogged and cyan is 5% clogged (barley noted on prints), but before buying a head try to change cap stations and make at least three cleanings cycles, for each cleaning make a nozzle check and compare them, if you are able to...

filter? where? this printer does not have any filter in the lines, you said that if you leave the printer for several hours the ink comes back again... the filter is the problem... remove it or if you are talking about the dampers then change damper, this printer uses dx7 head and two dampers...

can be a printhead cable or flat cable from mainboard to printhead board, verify connections on printhead cables first

Hi everyone I had working on an old spitfire 65 and after a couple of prints and turned off then on the error appears -System Error E103 Fuse 2 Error this is a Fuse error for the printhead no. 2 can be a bad cable and the fuse in the mainboard blown out I already checked fuses and all are ok...

Thanks for your answer I have MSA but i can't access to technician mode! i lost my password... normally i do about than double click in mutoh logo then double click in MSA logo close and double click in right bottom mutoh logo but a lost the user and password!!! do you know how to find it? or if...

Hey guys just activating this post after 2 years damn! I can0t change the serial number on my Mutoh Board can some one tell me hoe to do it? i did I went maintenance menu 7.- parameter then Serial No. but i can't change any number there please if some one know how to do it let me know...