Search results

Little heat has always cleared that up for me

Hate even asking but need to match this for a customer and didn't have any luck with WTF and WhatFontIs. All help is appreciated!

I think it depends on where you are located and your customer. We use all cast materials for anything outdoors. We've tested several different calendared vinyls through the years and they don't seem to hold up to the extreme temperature swings in MN. I've seen some shrink as much as a 1/4"...

Thank you! I should have recognized the LHF vibe it's giving off

Have myself stumped again and I know someone here will recognize it. Thank you in advance!

My brain has given up! Looking for the font used for Reliable Custom Trailers. Thanks in advance!

I have a long time customer that has requested an electronic drive-thru menu that they can control what is displayed at any given time. Think Mcdonald's but not that large. Has anyone worked with a vendor that they would recommend? I know it will be spendy, the customer is aware of this too...

I feel like I should know what this one is or something very similar but I'm coming up blank. Figured it's time to call upon the pros. I am recreating an image for a decal on a 1950's Marquette Porto-Fast Battery Charger. The image is what is left of the existing print. Any and all help is...

I am not familiar with Mutoh but I get the same thing when the humidity is too low with our Roland. Static electricity is causing ink particles to stick to the rollers and then be transferred to the material as it advances through the printer.

I've successfully printed on 1080, laminated, and contour cut. It accepted ink like any print vinyl. Was on a vehicle for two years before it was stripped to be sold and looked just as good as day one without any adverse effect to the adhesive. I run a Roland VS-640. As far as the film on...

You're the best, Tiki! I felt like I'd seen it before but couldn't pin it down.

Anyone recognize the font used for "nelson" ? Tried WTF and WhatFontIs with no luck. Thanks in advance!

I have had good luck with PMS 1235 printed on white reflective to match gold reflective. I have a Roland VS-640 CMYKx2.

It shrinks because it is a calendared film.

I have not used this site for side by sides but have had good luck with snowmobile and dirt bike templates. https://www.motosportstemplates.com/sidebyside.html

Thank you, SignasaurusRex! Your font knowledge is appreciated.

I feel like I should know this one but every one I look at in my arsenal is a tad different. Thanks in advance for any help identifying :)

Due to the mercury, we recycle it just like fluorescent bulbs. We do service signs so we have a recycler that comes to our shop to pick up.

I have not cut material quite that thick but have run into a similar issue when the blade holder itself gums up. It would drag the blade through the material rather than it turning the correct way to cut it. Sewing machine oil in the holder worked for a while but ultimately, I replaced the...

I've never had an issue with it peeling and have done several for a local company over the years. In fact, removal is tough as it seems to bond really well to the smooth surface. We use scotchcal 220 as well. We have a very thorough cleaning process before installation.