Search results

Bitmaps-> trace bitmaps

Yeap, sure does..... See if this helps... Instead of a snake, use a circle...(easier) Draw a circle and fill with the color you wish to use. Now draw a circle that is .500 bigger than the first.(this will be the cut line) Stroke that circle with a black line(3 pts) Center the first...

Volker on the PC side, the plug-in works "OK" with CS2, and yes you can cut straight out of CS2.(The Plug-in is a FLEXI front end) For contour cutting, it will work fine using the REG marks.

Contact Bill or Mike, I think Mike did the logo.

I have went through a few external drives in the last few years... Most have problems with heat..... I have a WD drive that turned black from the heat inside the case.... My next one will be a nice small external case with a fan and I'll put the HD in it myself. As stated...

I tend to save as an EPS then use ILL to save to web.

If it's just basic black print, you can add it to Prod Manager and print as you do with any high end printer. However, this does only use the basic print mode of the printer, so if your using features of the printer's print manager, they will not work. Example: If your printing on photo...

90% self taught.... Big thumbs UP to TechTV, down to G4.....

A few Q's What speed are you running at? How old is the blade? What is your pressure set to?

Have you tried to slow the cut down? On my CE3000 it does MUCH better when slowed way down on thick material.

http://www.alienskin.com/ec5bundle.html Here's a few more that I use also....

Something like these? http://www.allcompu.com/aurora/index.htm

Is there an easy way to control the boundary offset like in Flexi?

USB 2.0 Spec is 5 meters. Most versions of Firewire is 4 meters.

You also have some options under the transform menu(Pathfinder)

Yes, it is the X direction...... Not Y..... Sorry, for the confusion on my part as I rotate my prints....

I put the printed material in with the Graphtec Reg marks. I set the bottom right reg mark as the Origin Point. Then set Axis Alignment for any misalignment. The cut mainly off on the Y axis. Very little on the X axis. Most of the prints are around 13"x30" I added more bleed area...

I have a CE3000 without ARMS sensor and trying to do contour cuts through IL CS2 with cut master. Material is around 10-12mil and seem to have issues with following the contour cut. It is off from my test material which is around 3mil. I have slowed the cutting speed way down which helped...

The ARMS sensor upgrade is around $500 the last time I checked.....

Thanks Checkers that is VERY close if not 100%.... and I think that will work!