Search results

Pretty sure the Bobcat is the same as all other side by sides, ATVs, and dirt bikes. The body is LSE (low surface energy) plastic which makes it easier to wash dirt off. It also makes regular vinyls and especially low-tack vinyls like wrap vinyls not stick. Typically you make graphics for them...

If you wish to print-cut on the files you have received, you should use either the eps or pdf file. The svg might work if the LXi software can use it.

Did the company that you bought the printer from set the printer up for you and show you how to use the RIP? Is your file creation software set up to export the files correctly with the correct profiles? Are you using the right colors in creating your files to get good output or are you just...

Since it sounds like you don't know how to use the software well nor understand how it all works, I'd first say it's a mistake to start with AI as your primary design software. It's too difficult to do basic things in AI, and it seems Adobe purposely makes it hard. I believe you would find it...

I just started using an S80600, and have found the canned profiles I am using a pretty much spot on and the grays are perfect. However I am using profiles from the vinyl manufacturers. I got them from the Epson Edge Dashboard and from the vinyl manufacturer websites, not the Onyx printer and...

The tops of the letters should always run along the pole. Even if it weren't bent, it would look upside down.

At first glance that looks like Dom Casual

Sorry. I was just reporting what it says at onyxgfx.com

The S40600 has only been supported since version 19 of Onyx. You'll have to buy an upgrade.

Months is OK. Years not.

Although I have never clearcoated a sign that was installed outdoors, we have made digital prints on cast media, NOT laminated them, and they were used on vehicles and helmets that were then clearcoated. We have never had any problem with durability of those. Our go-to media for those is Avery...

Are you sure the cracks are in the vinyl? It might be that the vinyl and laminate are shrinking (as it always does) and it's causing the clearcoat to crack.

I guess for me it was always having the "eye". Like being able to paint a straight line or cut a straight line with knife or scissors. Or seeing center and level. My employee is the same.

You don't even have to do that. When you apply the 1" wide banner tape at the edge, the tape forms your fold line.

Are you asking for reverse channel letters that any channel letter supplier can make or the halo lit house number letters? I have only found manufacturers of those in China, not in the US.

The standard always was the stated size was the unfinished size. Hemming reduced that by 2" each way. (1" for each hem). That said, you can make a banner that measures 36" after hemming using a 38" roll of material. The backside of the hem doesn't need printing on it, and you can print 37" of a...

In Corel Draw I would say no. There is no function for that.

Onyx Thrive supports the EFI Pro 16H since version 19. Just upgrade your Onyx and print to the EFI using that.