Search results

Since the first day the printer was fueled with dye ink. Now I switch to pigmented ink. OCP Germany is the manufacturer. I heard is a good one. The problem is I am loosing magenta and black while printing. Heavy. About 25%. After a while, if the printer sits idle some nozzles come back...

One more atempt to get some help. Black channel is starving when the printer is idle. A test print revels almost no ink printing. But if i start to print, the black channel comes to life in about 4 inches and it is ok the printing is on. A print test right after print is ok, but is the printer...

One problem: black and sometimes yellow, disaper when not printing. After 3-4 inches of print, they come back. While printing every color is ok. A simple clean brink back all the inks in perfect condition. Why is this ?

just spoke with the dealer. he told me the inks are made in japan (he saw the papers at the croatian producer of the printer), it may be made by dupont (but not 100% shure) and it is a waterbased ink. anyway, local azon dealer has a non white dts and he told me that since october last year it is...

some pics. prints look better in reality, i'm not an expert photo and pics are taken with my phone. low rez print on PVC board, hi rez print on white plexi, normal print on aluminium.

There is no vacuum. Only a glass table. Heaters are made from some long IR tubes. It was difficult to print on 2 mm pvc board. Actualy is was hard to remove the double side tape. Maybe i was using to much heat. Experiment will be my midle name. The thicker the board is, the easier to print...

Haven't try 360. 720x720 4 pass, is ok, as print quality. Maybe a veeery little grainy. I did not see a 4880 before, in action, but i can compare with my mutoh draftstation. Speed doesn't seem slowed down, but for some materials it seems better to print unidirectional. For forex 5 mm thick, for...

Some more tests before lunch. As I told you, rip is a joke. Zoom 64 rip. korean stuff. Some basic layout tools, white generation algorithms(quite good in fact), and basic color adjustments. And here is the interesting part. There is some kind of per channel ink limit. For white plexi at 720x720...

17000 euros, taxes included (24%).

How can i find out what ink it is? 1 liter of sepiax is 150 and. 220 ml cart is almost 100 euros. It is easy to find refillable carts for 4880 to cut the costs.

Just get my azon dts white printer friday. Only a few tests, since is easter here. What can i say? Prints are looking very good. I print on aluminium, white plexi, pvc foam. All ok, scratch rezistance is ok after a few minutes, cannot whipe with alcohol. Rip software is a joke, but can live with...

It may be the dampers. Just check the serviceman manual and there also suggests the dampers failure. It is more difficult to change dampers than my roland's, but not impossible. I'll give it a try.

Yes. I was filling the printer with dyes on day one. March last year. No problems so far. Except the one mentioned above. Or it can be the carts. The rubber where the carts connects to printer is not sealing properly anymore?

I have a 9700 stylus pro for about a year. Heavy use. Dye inks from the first day. If i print a big red poster, over 2x1m, sometimes magenta will dissapear after print over 1,5 meters. Both magenta channels, or only one. I have a spare cart, i replace it, all was good till yesterday, when it...

Hi, i profile a backlit material for my epson 9700 with xrite Pulse color elite and wasatch 6.8. I know i should use some special equipment but i thought puting baclit onto white paper is enough. The end rezult is ok for the colors but i have very dark shadows with no detail, almost no gradient...

Why won't my printer turn on? 11/4/10 By GO TEK Staff If you are having issues getting your printer to turn on, here is a simple checklist to follow: Is the printer plugged in? If not, plug it in and try again. Is there power at the outlet? A simple way to check is to plug in a working lamp...

Your printer is young. I print every day, even +150 meters a day and all the nozzels are allmost perfect for more than 2 years. No extra care than usual. Sorry i cannot help you if the printer wont power up. Do not have a service manual. All i know is that if you want to enter that menu you have...

Maybe it is not the captop fault not sealing well. Maybe you have some debris and hardened ink around the head itself? Try to clean arond and beneath the head carefully not to touch the nozzels. Do you have a head strike? How old si the printer? How much are you using it every day?

Press the knife to release the head assy. Move the head to the left and expoze the capping station. Get a headcleaning swab and some cleaning solution and clean the wiper and the caping station, captop. Alos pour some cleaning fluid on captop.bIf the mentenance tank is full, you can empty...

press the cleaning button. reprint a nozzle check. if it is not perfect, wait couple minutes and reclean. probably after that it will print perfect.