Search results

Thanx for the info Jackpine. Will your method of cleaning the nozzles work for a Valuejet 48"? That's why I asked this question in this forum by the way. I've also ublocked my email and pms for your convenience for any help you can give me. I can get the printhead carriage to move away from...

I've not been using my printer much for the last couple of weeks and now I've got clogged nozzles (two of the magenta). I'm just repeating the cleaning cycles. Any other ideas?

I've been using my Valuejet for a few months now and it's going very well. I like being able to plot on my Graphtec while printing on the Valuejet. The only problem I'm seeing is not related to the printer, but trying to keep the media clean. Anyone have experience with trying to clean the...

I network my dsl and two computers in my two story house without cabling. I have two gadgets that plug into electrical sockets with ethernet cables connecting each computer and the dsl modem. Works great.

Regarding reply #42 above... I'm curious about the Teflon strip also. I've not had to replace mine yet, but I have taken it off and turned it upside down due to it getting marred from a bad plot. Then I re-pressed it down over the adhesive which remained on the platen. Do you have to remove...

I buy 54" x 164' (almost 55 yds) Orajet 3651 or 3691 gloss and have it slit to 51" wide. You can wrap your mother-in-law up with the remnant, and it really holds well!

I bought a 48" ValueJet recently, including Flexi 8, Enduralam 53" laminator, Graphtec 7000-130, 54" plotter and lots of media and inks from SignWarehouse. Here's my story so far. The printer is absolutely kick A$$. I've never used a wide-format printer, much less a laminator or the high tech...

How did you get this is to work in Illustrator CS2? The install menu only shows me up to CS.

I just got an FC7000-130. I'm running an Ioline Super88 - 30" until I get all the low downs on this new machine. Regarding the flying roll problem, I'm not sure if this relates to this machine, but I insert the leading edge of the vinyl between the rollers that support the roll before resting...

Need latest firmware update for FC7000-130 Is there a way to see which firmware version the machine has before updating? Please provide a link for this update and any instructions to do this update. Thanx.

I'm asking for information about instructions for porting to this machine from Signlab 4.95 (win98SE), 5.0 and/or 7.1, Flexi Pro 8.0 rev3 (all WinXP), and finally FlexiExpert 6.6.1 (mac version). I haven't found drivers via Graphtec, Cadlink or SAI for any version of Signlab or the Flexi 6.6.1...

I'm running v. 6.6.1 in classic mode. I have a G4, 1.25 ghz DP. I've just started having probs with production manager not deleting cut jobs after they've completed. If I do delete them manually, they pop back in. I have PM's prefs set to delete these when completed. Any ideas to correct...

I use Disk Warrior myself. I run it from another volume once though, so sounds like good advice. I have 2GB ram, can't put in more than that in my G4. For backups I use Propaganda.com's Deja Vu. I have Mac and Windows 'puters. I toggle between both, but I really like the feel of the Mac's...

Darn, did it again... but that was a long winning streak.

Wow! I've messed with this for 4 days running, and it looks like that did it Geary. I'll let you know if it re-occurs. Thanx buddy!

I may not have tried that at the same time, so I'll try that. Somebody's going to get a really warm fuzzy if they can help me figure this out. It's not like a major problem, just annoying and I fear it might be leading to something worse. -John

I'm setting it up to 'delete after cutting' in preferences, under the edit menu, while in PM. It has always worked before, this is a new problem, and after years of use. I also try to delete jobs using the trash can icon in PM and the delete key. They still pop back in. Occasionally they do...

I'm using Flexisign 6.6.1 on mac in classic OS while running OS 10.3.9. The production manager keeps jobs but it is set in preferences to delete after cutting. Even when I try to manually delete them, they stay put. All different flow controls in port setup have same problem. I've tried...

Yes, I understand about this method. But if I have to change its color first, then duplicate it, then ctrl click a color.... wouldn't it be easier to just ctrl X if the program did what it's supposed to do?

I've done that yup