• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. reviving print heads on UV flatbed

    Thanks, I did a soak with lint free cloths for about an hour it helped a little but but I think I may need to do it over night like you said. I am pretty sure they are clogged as opposed to out. I would post a picture but the yellow is so light on the test print I dont think it would be visible.

  3. reviving print heads on UV flatbed

    Hello I am running an Arizona Oce 360 XT that has been giving me some issues with my test prints. I am getting clogged nozzles on both of my white heads routinely as well as one of my yellows. I know there are a ton of tricks for reviving solvent print heads, but haven't found anything on flat...

  4. Media that can be applied to brick

    will the asphalt art hold a solvent print and what is the life span?

  5. Media that can be applied to brick

    We have a client looking for a material to be printed on and applied to the brick walkway in front of a statue. We run a solvent as well as a flatbed UV printer, I am assuming that it would need to be a rubbery media and possibly heated for adhesion. Any thoughts/ suggestions are appreciated.
  6.

    Best way to revise deflected nozzles?

    Mixing a small amount of acetone with your soaking liquid can help, then do a 20-30 minute soak>hard clean>test print

  7. Rasterlinks question

    Rip and print was the solution, when it was installed the tech didn't go through the ins and outs. My problem was that if I get handed a rushed job in the middle of printing I couldn't load anything to the que.

  8. Rasterlinks question

    We just upgraded to a Mimaki JV300-160 and switched from Flexi pro to Rasterlink 4.3.2, I love the interface but one thing I cant figure out is how to que up the next job while a current job is printing. If I do file>open it will put it in the que after the current job finishes, Whereas in Flexi...

  9. JV-33 Color drop out

  10. Mimaki JV33 Banding issues

    We have similar problems, a temporary solution that we found was setting our prints from 16 to 32 passes and making sure that HQ print is selected (This is in Flexi). This will add to the time it takes to print but its worth trying on a solid color test print to see if it helps.

  11. JV-33 Color drop out

    We just had a service done about a month ago, the ink is at 80% So I wouldnt think it was the cartridge

  12. JV-33 Color drop out

    Yesterday I was printing on Perforated media on our JV33-160, in the middle of the print the yellow and one of the light cyan dropped out (we use 8 cartridge SS21 ink). Test print revealed the drop out so I ran a hard clean and then test printed again, both colors came back perfectly. I...
View older results
Top