• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. anthonyd969

    Hello, I am following along. I am thinking the same thing. Ready to upgrade. I have 2 - XC540...

    Hello, I am following along. I am thinking the same thing. Ready to upgrade. I have 2 - XC540 PRO III's. I always liked having the backup and being able to service and repair my own machines. But it's time to make a move. Going to the local dealer by me in 2 weeks to take a look. I will keep you...
  3.

    My Roland XC 540 SolJet Pro III Error Codes - Help Please

    Thanks Jim, I will reach out Monday. Had my daughter get engaged to ight and have a friend's wedding tomorrow. I'm so sorry about Milton. Hope you weren't too affected Jim. Had that here years back with Sandy. Got about a foot throughout. Ugh.
  4.

    My Roland XC 540 SolJet Pro III Error Codes - Help Please

    Thanks Jim. Sorry. I have only done this once before with an issue a few years back. Do you still offer tech support by phone? I had someone send me your info.
  5.

    My Roland XC 540 SolJet Pro III Error Codes - Help Please

    Definitely a good idea. When I replaced the scan motor I did remove the pulley right above the motor. I'm thinking you may be right and it's misaligned. Keep you posted. Thanks again for your time. I appreciate everyone's help here
  6.

    My Roland XC 540 SolJet Pro III Error Codes - Help Please

    I ordered two and have them coming hopefully today. That's another thing someone mentioned. I've changed that about 6 months ago. Thinking all those movement even after cleaning could be failing. Thank you
  7.

    My Roland XC 540 SolJet Pro III Error Codes - Help Please

    Thank you. I changed and put a new headlock sensor yesterday. But will make sure its secure then look into those other ones again. Thank you

  8. Service Motor Error 0080 and 0010

    I removed t He cutter from bearing block. Took off flushed it clean, re oiled it and reinstalled on the cutter blade. But while I had it off, I moved the cutter by hand "not block" and still felt the clunk or bump when I moved slow left holding it in my hands. So only thing attached to it was...

  9. Service Motor Error 0080 and 0010

    Did them with alcohol. Took the cutter bearing block off and cleaned as well. Ran initialization again. Head locked over caps then slid cutter accross. Still feels like a knocking or bumpstep when I go slow to the left. When it's done it resets and heads are 1/4 inches off caps tops to the...

  10. Service Motor Error 0080 and 0010

    Thanks Jim, well I pulled it flushed it and it's spotless. Reoiled and put back in. Same thing again. It was actually still clunking without the block in. When I moved the cutter slowly left no block. So it's something else. Cleaned the rubber strp going to both pulleys as well. Still won't...

  11. Service Motor Error 0080 and 0010

  12. Service Motor Error 0080 and 0010

    Well no luck yet. Did the cleaning and added the sensor interrupter for the carriage when it comes over to the right. Did the limit initialization went through and looked good. The only thing I noticed was bringing the cut head to the left it was making a clunk noise while moving not to smooth...

  13. Service Motor Error 0080 and 0010

    My next step. I will keep you posted on the outcome. Thank you for the tip

  14. Service Motor Error 0080 and 0010

    Yes, head carriage was locked but took forever to get it to click. Never took that long before. Even afterwards I was able to run one job then error message and head sat more to the left and not direct like I just setup. Guide rail I did clean and lightly lube properly. There was buildup...

  15. Service Motor Error 0080 and 0010

    I was afraid to mess with that. But going to clean that next. I will let you know how it works out. Thanks for the tip

  16. Service Motor Error 0080 and 0010

    Thank you for the reply. What should I clean them with? I don't want to use anything that will be to harsh or dry it out.

  17. Service Motor Error 0080 and 0010

    Thank you for the reply. What should I clean them with? I don't want to use anything that will be to harsh or dry it out.
  18.

    My Roland XC 540 SolJet Pro III Error Codes - Help Please

    Hello everyone, Praying I can get some help to get up and running again. I have 2 of these printer cutters, so I know them both well but finally got stumped. I have just one that is giving me the biggest headache over the past week. I came in one morning and the unit was beeping and flashing...

  19. Service Motor Error 0080 and 0010

    Having issues with my XC 540 SolJet Pro III Kicked out originally 0080, 0010, then changed scan motor now get this 0105, 0106 and 0040 Cleaned the encoder strip that was replaced 2 months ago. Now we believe its the Roland Sensor Interrupter GP1A05A5 - 15229506 Because the carriage won't sit...
  20.

    What would cause Printing shadows

    Yes, I did swap out a new head. I had somebody who worked at selling and servicing Rolands. Obviously he didn't fix the issue. I need to get another person here
  21.

    What would cause Printing shadows

    I will post a nozzle test tomorrow. Thanks for the info. I did have a carriage crash which broke the media clip. That's the fuzzy image.
Top