Search results

This very thing just bit me for about an hour when trying to get the perfCut to be recognized in Versaworks from Corel. Strange thing was that even after correcting this, it seemed that I needed to restart Versaworks to get it to finally pick up on it in the file - like there was a setting being...

I've been having really good results with the solvent that DigiPrint sells. That and a good lint-free cloth for large surfaces. Sometimes you have to let the solvent sit for 10 minutes, but it's been pulling up dried ink that's been on my machine for years.

Interesting. Who does make the print heads then? I wanted to have the original heads cleaned, but when I sent a picture to the place they said they probably wouldn't be able to do them since they looked like Epson heads (which apparently don't tolerate high pressure washing). Unfortunately I...

Alright, so I think I had a couple things going on. I did a temporary repair on the Y/K head, then used a machinst's depth gauge on the bottom side of the carriage to check that all heads were a similar depth and even. the C/M head was slightly up and to the right. I pulled all the heads...

Hi balstestrat, thanks for the reply! So I ran a test print, as you recommended (see photo) and it is certainly off! The confusing thing is that the VG-640 does not appear to have any sort of mechanical alignment for the print heads as past Rolands appear to have. All 4 heads tuck into a single...

Hi everyone, I'm new to printing and looking for some help. I bought a used VG-640. I read all the terrible things people had to say about these machines and how you should never, ever let one sit unplugged for any length of time, and bought one that probably sat for years. I got it really...