Search results

thanks for the link, many uses for me down here in australia :) thanks heaps

i use a mimaki 1631, i contstantly get supplied out of date inks that im told are fine to use, i havent had any problems with adhesion or things like that, but 2 of my heads are blocked in my yellow and this well could be the cause. ( i also even bleed excess ink out of old bladders into new ones)

yeah i have googled, this site always provides the goods though, so ill try the search engine, thanks mate

hey all, i have had a couple of issues with my mimaki jfx-1631, in my yellow there about 3 heads that are blocked and its causing all sorts of issues! i had the print technicians come in, they brang a new cleaning solution, they tried getting a microscope and it all failed. i have managed to...

thanks everyone for the info, i made a mistake (first time ever) lol, i ment 75 boards, but even then its still a hassle to remove and re print, through cost of time and all the rest! what we did do is print on block out white and vinyl over the top! very helpful with all the ideas! thanks...

hey all i have direct printed 500 coreflute boards on a jfx 1631, 25 of those need to be re done due to head strike and colour drop out. what i want to no is if there is any way you can remove the dodgy print with out damaging the board and re using! i have tried using eco solvent...

hey all, im have a little trouble with editing an image in rasterlink. i just want to put a small percentage of black into my image but its not letting me raise or do anything in the colour replacement menu. i no if you put your mouse over the picture it shows you what percentage of colour it...

hey all, im printing on an lgld 3910g1370 on my jv33-260. for some reason after printing the vinyl shows a small glittery effect throughout my hole print.(really noticeable in light reflection) the quality is fine on the image, no banding, its like the ink is setting into some of the pours in...

we have looked at the 180 its just the price there offering isnt the best, but were doing jobs in kalgoorlie installing signs on the front of old awnings, mite be the only way to go for reliability??

thanks alot! i think ill operate with the two of them! i have a whole supermarket to revamp which guestimated we have around 75m2 of printing so the ritrama should be fine for that. then we have some outdoor country jobs which need to be atleast a positive 5yr so the 3m will be good for that...

hello, i had a sales man come in and lay down some prices on a rijet75gwop, at $315 per roll, i haven herd much about this media but he tells us itll be the same if not better than the 3mij40, only diference is the 25mics, but he wants $470 for the 3m roll. clearly the rijet must have some...

yeah there scratching there heads. i no the lads pretty well, and they seem to think its just something with rasterlink. i was hoping it mite of happened already, and someone has an alternative for us

oracal? have never herd of it before in wa, any specifc type?

thanks mate, i have been going through 3 different suppliers who all say there products are the best but each one has there problems, for the avery im not to sure exactly what it was. ill do some research and get back to you on it. as for the 3m im looking for prices and if there is any stock in...

lgld3920g1520 that seems to be the preffered choice but still is only 60 - 70% we have problems with there gloss laminate aswell, leaving what looks like smudge marks in every revolution of the roll, we were using an avery but still had the same issues, its like we get the end of the batch, the...

hey everyone, were starting to get into summer in the downunder on the west side and the past few years haven't been the best in finding a durable vinyl to face are conditions especially in the country, lots of wind and thunderstorms but drastic heat changes from 42 degress at 10am to 4 degrees...

thankyou petesign, i have the ij35 on order! im also looking around for the brightline aswell. appreciate your help thanks mate!

i am looking for a new blade and rollers for this machine i cant find anything in australia for it!!!! HELP ME!!!! even second hand but still some life!

thank you very much for your help! we have been printing on an lgld3920, but being in australia and especially perth its hard for us to get specific vinyls like that, also that 3m being a car vinyl we dont do alot of wraps in are workshop, were more promotional and retail. the last 3m i printed...

i am new to mimaki printers and the eco solvent inks, does anyone no a good recommended 5 year media?? and also im trying to move from rasterlink to onyx to begin making my own profiles, am i able to download it anywhere?