Search results

Also most common parts for the 1204 are still available. Up until recently Mutoh made a version that printed on grommeted banner media. Most 1324x parts are compatible as well.

Or if you’re using the bulk adapters, most of the time it means you didn’t seat the bag all the way onto the needle in the adapter

If your subtank won’t fill chances are the pump is weak, but working around that— Why not tape the switch down? The sub tanks are small ink tanks behind the.cartridge slot assemblies. Or maybe the. Switch is actually bad.

Subtank Hi means the high or full switch is not activated.

Hi Brent, One more suggestion— grainy prints on 1641s tend to indicate bidi alignment issues. You said you did a “head alignment” but specifically did you do the bidi’s? Also the auto calibration is not necessarily accurate enough. You should be reading the results with a loupe and making manual...

Here's the Parameters update section. The correct charge flag menu is in here as well as the ink config menu

so your printer is reading "Start Ink Charge ---> E ?

The original value cut uses a 2 mm Blade it’s compatible with a GCC Roland cutter. If you go on eBay or Amazon and look up blades and Blade holders for GCC Roland they fit.

With newer firmware it will run with 2 bad chips on most error conditions

Toggle the asterisk on in All on, then look in the Setup menu for IP Address

The newer Versions of MSA require secure passwords. MSM will do it. If any items don’t show up in the menu, someone has turned off the asterisks in the Menu Option item in the menus

The other reasonably priced solutions are (1) Have Mutoh generate a ULK file which will let you run for 2 weeks without cards (free) or (2) buy smart cards from STS, Triange, Bordeaux or other 3rd party ink companies

You could change the charge flag in diagnostics to user/init: not charge and it would pump the cleaners through the system

You can update the firmware with MSM (Mutoh Status Monitor). SM uses the same registration as the Mutoh Club. Go to mutoh.com>support>printer registration>(login)>application & manual OR Public FTP>MSM. You still need the login from Mutoh Club to install MSM. If you bought it used or whatever...

Mutoh doesn’t really go to great lengths with Flexi on the XPJ series. They have extensive profiles for VerteLith and that’s what they support.

My roots are in offset. Google it properly: A/M Multigraphics 1218 press wiring . Lots of listings.

Do you realize Mutoh’s warranty is just 90 days? Yours is 2 years old and they are offering to help with cost. Smile. You’re blessed.

SAi says this is a common issue and to use the 32- bit version. That’s why it’s there

Classic damper issue. If it sits for awhile it will recovers somewhat but drops nozzles again when printing

Cool. Either put in a ticket at equipment. fellers.com or I can call you this evening. I’ll need your customer number or company name. DM it to me. Meanwhile order a head fuse from solventinkjet.com