Search results

Do you have those other devices or are you just ripping in Onyx to see what the anticipated ink costs are? I get push back all the time from people with Vutek and Durst about the fact their inks are $.04/ft2 cheaper....but the printer is $400,000 cheaper or more. Most of my Colorado...

Most of the adhesive vinyl we sell has gray adhesive on it nowadays...think of it as a primer before you paint a new color. We still sell a fair amount of clear adhesive for people who don't want to spend the money and time to flood white when printing 2nd surface on acrylic. It is a much less...

can you put a gloss lam on top instead of buying new sheets of inventory?

Miller Weldmaster makes awesome and easy-to-operate edge welders using hot air or hot wedge technology. There was a good comment above about the importance of support tables....without the tables, life on any welding or sewing machine is going to be hard. Miller has the T3 and the bigger...

The gas mileage is very different with UV gel tech. You get a lot more usage out of a liter than you do many other technologies.

I'm sure I can help you out with a few people to do the job for you. If you email or call me directly, we can find someone for you in Chicagoland.

I sell Glass Apeel and other products like it...I'd be afraid that if someone is just "slapping it up there" and didn't get a tight seal that it would blow right off the truck. I assume you are talking amateur installers? If so, I'd avoid anything where the lack of attention to detail (in...

Find a local Drytac distributor (Reece should have them) and ask for a hand sample of Polar Grip. One of my customers did a job on coolers (not sure what brand) but this product stuck to the textured plastic surface. It is a high coat weight of high-tack adhesive designed to stick to stuff...

How long do you want the decals to last? There's nothing which will be added as quickly and easily as magnets but there are plenty of removable adhesive products which would require someone who knows how to install. Or you could do the truck-side curtain system where you put a frame around the...

Overlap all day...makes it much easier to install...most of my customers do a 1" overlap and trim down on the wall to a perfect butt seam.

The owner is on this forum....I know that. Other than that, I don't know much about them.

you absolutely can mix and match. But when you do so, it does open the door for trying to blame more than one person if there is a failure.

Barring big issues, if we know in time to get parts out, you should be up and running the next day. I read your post about the techs being on-site during the same day, which is so impressive. I've seen it happen in major markets where they have several available technicians. If you are beyond...

I'm in Chicago this week and can come over and show you if you still need some help. I'll be out in the NW burbs tomorrow afternoon. You can reach out to me directly via email. No charge - happy to help if I'm in the area.

Since you are in NJ, you can go see the difference between a roll and flatbed as it pertains to applications and processes at Colex. They are only about 20 minutes from EWR. I can set that up if you'd like to go over and see the units.

Sorry I didn't see your question. They run for the low to mid $20K range for a flatbed. It is important to understand that I wouldn't sell someone a flatbed laminator if they want to do a lot of laminating. If you want to set up and run long runs of laminate, then a flatbed is not the...

Sounds like your nip is out of alignment. If you get a Seal tech in there to realign the rollers, you shouldn't see the media walk like you are.

I didn't see the post, but yes you can print on Lintec. I had the three main Lintec sku's "benchmarked and approved" and the profiles are available on the web.

We have only sold one service contract for the Colorado out of dozens and dozens of units. Because we service most of the machines we sell, it isn't an expense I worry about too much once the unit is out of warranty. I recognize it is easy for me to say as I'm not the one writing the...

I'll be there as a distributor showing off Fluid Color UV printers, Canon Colorado printers, Roland, and all sorts of finishing equipment. Looking forward to it!