Search results

Are you guys using an old version of onyx maybe? I don't use the router function, but all the stuff I send for knife cutting is fine. Not a fix... But might be a work around? Have you tried adding a reduce nodes action in your action set to see if it reduces them? Takes about 5 seconds for...

We got it from laird.they went on about how good it was compared to Coro..and it was, it was about 30% more.... Which isn't bad. But now it's near the price of alupanel, so what's the point? I don't blame them though, it was a slow mover. They gave me advance warning as they were buying a...

Bubble lx used to be $15 a sheet up here in Canada.... We used up all of our suppliers stock, then all of a sudden they found out in order to get more the price jumped to $40 a sheet.... And we had to buy a skid of 200 at a time now. . Needless to say we never use bubblex anymore! Too bad as it...

Most trips have different levels of atomization, ICC profiles also dictate the colors you printer uses, not illustrator.. or rather they both work together, for the most part. Just like any other software, every rip is not built the same... Some are more stable, some are faster, some work...

I used to print decals for a guy who would apply them to his garage floor, then epoxy overtop of them. We always used a high tac vinyl just so it doesn't lift up while the epoxy is curing - I dont know how long it lasts... but he had a few that were years old and it was fine. I imagine it'll...

Onyx 19 install file wont be hard to get. your issue is going to be printer profiles for onyx 19.... What printers are you running?

Did you get it done at a shop... Or just from someone? Looks worst than the first time I engraved red lamacoids. I'd say your customer probably won't care though... We see more detail than they do. Ask if you can return it for another pass.

I prefer project farm

On-top of the above, I'd just like to point out you need a special vinyl in order to laser it. Even if you didn't care about the toxic fumes...m the one time I tried to laser vinyl with PVC in it, the edges came out yellow due to the vinyls reaction to heat. Something else to keep in mind...

I think this is more that you goto a tire shop,.get an invoice for $450, pay the invoices then when you get home you see they charged you $500... And never mentioned, or line items the $50 on additional fees. You authorized $450.... And then they charged $500, which is, in pretty much every...

You guys are lucky.... Grimco is 15 minutes from our shop, and we get a $30 shipping fee and sometimes a $25 small order fee added on if our order is under 1K.... I think the small order fee is under $200. Free shipping at $100? sign me up! We used to be at $500 as it was negotiated... but...

I don't think so, I just cloned the Barcode workflow on roll action, changed the directory and told it to ignore certain layers in the PDF. I just remoted in and origin reset isn't ticked off. I do feel like it goes to the first mark automatically with Onyx.... if printing a 20" item on a...

Heres the scripts I made... incase anyone finds it usefull. Suma-Fiducials - This one will increase artboard size by .6" left/right, and 1.25" up/down, add circular fiducials, and then add the barcode. Summa-Barcode - This one will just add the barcode. It wont resize the artboard...

That's too bad, I thought the long bar was a nice addition as it could read it from the mid, then it'll know where to go once it reads the barcode. Currently plan on kiss cutting a full roll, then relosding the roll and then perf cutting - so even if I print left justified, once rotated if the...

Finally had a bit of time. Rotating 270 worked. It'll read the barcode and pull the data from the pdf just fine! I tested both front and back... And it reads it perfectly and cuts it out. I did discover even If it reads the barcodes it heads to home for the fiducial... So if you have some...

Ahh. I feel like it's a glitch? Why do they want you to rotate it? Unless I'm missing something... Lets use a map as an example. Top of the artboard is N... Right side is E... Bottom is S, Left is W. When you import the PDF into summas software... That stays the same. however When...

99% sure I'm done... knock on wood. Only thing I'm not sure about is if the barcode that ends in 0 or the 5 goes on the top of the artboard... or if it even matters. Got it generating the 11 digits, plus 12th BS checksum digit. So it does a few things - Step 1 - Generate the barcodes...

I could, but then the PDF would be sideways... and loading it into onyx would also be sideways unless I made a quickset to rotate it in onyx. It's not that the PDF is the incorrect rotation, its that the summa software is opening it sideways when it pulls it up via barcode for some reason...

Good to know it can do it, but it'd be annoying rotating the pdfs! Hopefully it's just a glitch that they can fix in the next gosign. I can open the PDF normally with import and it opens fine - so its just when the barcode calls it for some reason. I did find I could open the PDF, hit save...

I'm losing my mind. I have it generating 11 digits, and the front and end bar... still the same issue saying invalid amount. so I took one generated by onyx and used the postnet font... It has the beginning, 11 digits, then it ends in a 4... then it has the end large mark. wheres the 4 come...