Search results

I would like to find a list of technicians in the USA that service the Mimaki JF1631. It would be nice to have a list of people that do this. Thanks

I swapped to heads on the same machine and when I went to start up I got this message system halt: 11d:pcb SLRLY-F1 I am being told the JF Interconnect is blown, is that right and I am also being told that my bad heads will blow it every time is starts up. I was unaware that I had bad heads...

Does anyone know of a good source for the steps to replace a printhead in a mimaki jf 1631? I have the alignment tools and a fairly good video for doing the replacement but I was wondering about the initial steps and then also what to do once the head is install. Do you have to run cleaning...

Hello, I would like to move a good head from one of my 1631 machine to another machine. Do I need to order the tools to fine tune the alignment for the head from mimaki? Any help would be appreciated?

For some time I have been dealing with a drifting magenta issue on one of my JF 1631. Under the black print head cover over time it seems magenta ink mist has been getting airborne and is slowly covering everything. In addition on the wood surface i am printing on I will get magenta drift or...

Can anyone guide me in the right direction for dampers and EFI cleaning solution for a mimaki JF 1631 Thanks in advance. Jay

Hello, I have searched and searched on here for the answer to my question and sorry if this horse has been beaten but I am looking for reputable suppliers that you all have used and trust at reasonable prices. I have been using digi-supplies with success but I just wondered if I might be...

I am getting and error 04 code on my printer and it wont go through start up. it says error 04 param rom. Can someone advise as to what this might be? Thanks

https://www.dropbox.com/s/0vq537h5yue1pxg/20140417_101822.jpg Here is a link to my test draw. I know it is very bad but I have a few issues. 1. I have never seen this...why does it appear these is black ink in the yellow test test area. I have tried new cartridges rubber caps etc. Would...

I have been running trial and error to figure our an origin issue and I think it may be the encoder strip. I have read where some have tried to turn it upside down with luck but if that does not work does anyone know of a reliable source for these that does not cost $1000.00 bucks? Thanks

Hello, would like some expert advice. We have 3 flatbed printing machines ans i am considering getting a cnc machine to cut out signs after they have been printed on a 4x8 sheet of aluminum. My questions are 1. Can the sign shapes be cut with smooth edges on the aluminum 2. Can they be cut...

I am looking for a service tech in the Indianapolis area for my Mimaki JF-1631. Any thoughts?

I have 3 - jf1631 machines but one of them is having an issue I can't figure out. The origin is being inconsistent left to right. So when I am standing at the control panel, in the nearest right hand corner the origin right there is moving around on me. I can do a print and then the next...

Hello, I have 3 jf 1631 mimaki flatbed printers and I was wondering if there was a (simple) way to change the currents lamps, over to led lamps. Has anyone tried this or hear of someone doing this? My printers are all 2007 and 2008 units. Thanks for you expert advise. Jay

Hi I have 3 mimaki jf 1631 units. I have bought them all used and they are all great workhorses but being that they were used and are now almost 7 years old I am thinking about a newer or new machine, Right now I am eyeing the CET Xpress 1000. Either a 2012 or 2013. Would love to here...

Any thoughts on what might be causing a water not ready on my jf1631 Nothing has changed in the shop, I have replaced the water and coolant with no luck.

Hello, I have a new(to us) JF 1631. This is our 3rd one and we now have 3. This one we are trying to get set up and the mimaki tech is here but we are having issue with one side of the gantry not going up. the motor on this sided spins freely when we remove it and we have tried a motor from...

I am considering buying a turn key kit from Conde http://www.dyetrans.com/printer.php?webmaincat=printer&websubcat=7890&mode=systems&nav=systems&title=DyeTrans%207890%20Production%20Sublimation%20Systems everything in the kit is listed at the bottom of the page(does not include press. I am...

I am expanding into sublimation and I have a few questions 1.We currently have two mimaki jf1631 flatbed and print on aluminum blanks with white enamel and it works great. Can I use the same blanks for sublimation. I am being told the blanks have to a have polyester coating. Do most finished...

I have been selling signs online now for about 12 years but we would like to expand into festivals and shows for our personalized signs. We currently have two mimaki jf1631 machines which obviously are not too mobile. I am trying to find some combination of a machine or machines to make full...